【摘 要】
：
According to the solubility product of second phase in austenite, the Ostwald ripening theory, the grain size control theory and the precipitation strengthening
【机 构】
：
Central Iron & Steel Research Institute
论文部分内容阅读
According to the solubility product of second phase in austenite, the Ostwald ripening theory, the grain size control theory and the precipitation strengthening theory, the probability for formation and growth in austenite of the main inclusions such as manganese sulfide and aluminium oxide have been considered. The theoretically calculation results have shown that the manganese sulfide can be controlled to precipitate in austenite and to be maintained in the size of below 100 nm, while the aluminium oxide can t all redissolve in austenite therefore its size can t be controlled to very fine by physical metallurgical process. Moreover, the probability of controlling the reheating austenite grain size by inclusions and that of precipitation strengthening by inclusions have been analyzed. The theoretically calculation results have shown that the manganese sulfide can effectively prevent the austenite grain growth and provide somewhat of precipitation strengthening effect.
其他文献
宝钢2050mm热轧过程机系统于2003年完成自主改造,期间对其控制核心——数学模型进行了大量的优化和改进。针对精轧负荷分配长期依靠人工设定的问题,对精轧负荷分配模型进行了
从板形控制原理、性能、策略、计算模型和生产应用实绩五个方面对2030mm冷连轧机应用的CVC和DSR板形控制技术进行比较与研究,得出了初步结论。
无氧化工艺在采用改良的森吉米尔法的热镀锌机组中因其技术复杂,控制及操作难度大,对产品质量和产量的影响显著,被称为“核心工艺”。为此,结合生产实践,重点探讨无氧化工艺
日前,安讯士网络通讯公司推出了首款可提供真正HDTV性能的优异网络摄像机——AXIS Q1755。AXIS Q1755网络摄像机可提供卓越的HDTV性能,能够以全帧速输出锐利清晰的影像,因此
To meet the growing demands of cost saving, weight reduction, and safety increase from end users, high performance steel plates featuring an optimized balance o
基于宝钢连铸生产实践,对中碳钢、含铌微合金钢板坯几种内裂纹进行了微观组织检测。通过对裂纹表征分析,提出了其产生机理。
就大方坯及小方坯连铸制造方式生产帘线钢质量情况进行对比试验,因大方坯连铸与小方坯连铸的装备和工艺的差异,在生产帘线钢时体现最大的差异在于盘圆的偏析,从而使连铸小方
2007年德化县加大五险统筹征收工作力度,实行社会保障工作联席会议制度,针对五险扩面工作面临的新情况和新问题,采取积极有效的工作措施,及时研究解决。去年养老保险、医疗保
In this paper,the compactness and the phase composition of the protective rust layer on the surface of weathering steel were observed and tested using optical m
多种社会需求使拼焊板在汽车行业的应用越来越广泛。与常规均匀材料相比,由不同材料种类、厚度、强度、镀层焊接成的拼焊板存在许多成形新问题。因此在一些情况下,对于成形性