【摘 要】
：
As we know, germanate glass fibers are promising medium to obtain 2 μm laser outputs, while all 2μm pulsed laser outputs generated from germanate glass fibers are active Q-switched which requires addi
【机 构】
：
Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, C
【出 处】
：
第七届中国功能玻璃学术研讨会暨新型光电子材料国际论坛
论文部分内容阅读
As we know, germanate glass fibers are promising medium to obtain 2 μm laser outputs, while all 2μm pulsed laser outputs generated from germanate glass fibers are active Q-switched which requires additional switching electronics, a passively Q-switched way may be more attractive.We demonstrate a 2 μm continuous wave and passively Q-switched laser output using a home-made Tm3+ doped germanate glass fiber.In the continuous wave regime, a output power of 44.7 mW at 1940 nm with a slope efficiency of 26% with respect to the launching power at1590 nm is achieved using a piece of 22 cm long germanate fiber.Laser output is also obtained with the excitation of a 793 nm laser diode.The passively Q-switched pulse output is demonstrated by using a carbon nanotube as the saturable absorber in the Tm3+ doped germanate glass for the first time.The germanate fiber laser generates ~1.5 μs pulses with a maximum pulse energy of 110 rJ, and the repetition rate varies from 15 to 84 kHz, depending on pump power.Result of this study can be used as potential potential application in sensing and monitoring with a further improvement in the performance of the fibers.
其他文献
对铝合金复合镀采用浸锌、浸镍和闪镀镍3种前处理工艺进行研究.利用弯曲法、锉刀法和热震法进行镀层与基体LY12铝合金的结合强度测试,发现仅有浸锌处理可以很好的通过测试.得到新的适宜的浸锌工艺配方:NaOH 100g/L,ZnO 10g/L,多羟基络合剂20g/L,氧化剂4g/L.结果表明,在该实验条件下无论进行复合电镀,还是进行复合化学镀,均能保证铝合金上复合镀的结合力,得到性能合格的复合镀层.
研究了电刷镀铁工艺参数对刷镀铁质量的影响,介绍了刷镀铁进行质量控制的工艺方法.实践表明:主盐氯化亚铁浓度,电镀液的pH值,刷镀液中的Fe3+、工作电压是影响刷镀铁质量的关键要素,工作中应控制氯化亚铁浓度400～450g/L,电镀液的pH值在1.5～2.5之间,工作电压在12～14V范围内;添加抗氧化剂碘化钾,可有效控制Fe3的产生,从而提高刷镀铁的镀层质量.
本文论述了目前电镀厂房技术改造实践中常采用的清洁生产技术,并用大量实践数据和实验数据进行了分析论证,可作为电镀厂房技术改造的参考.
系统研究了还原剂、络合剂、加速剂及缓冲剂浓度、镀液温度及其初始pH值对电站锅炉省煤器典型用材化学镀Ni-P施镀效果的影响,探明了镀覆速率、镀层硬度及其腐蚀防护性能随工艺条件的变化规律.
对氯化钾镀锌生产中几个易被忽视的问题进行了探讨,从中可以看出,有些措施是相互矛盾的.如提高pH值可提高浊点,但有时则降低镀液的分散能力;添加光亮剂改善低电流密度区亮度,但易引起镀层防护能力的降低等.因此,应根据生产要求,产品性能的要万锄口以调节控制.
总结了碱性锌镍合金工艺参数对镀层的影响及镀液的稳定性因素,提出了解决方法和预防措施,展现了锌镍合金工艺的发展前景.
以波纹波长、波纹波幅作为波纹纱结构特征的衡量指标,运用二次回归正交设计,研究花式捻线机在不同工艺参数条件下的波纹纱结构变化规律,建立了花式捻线机工艺参数与波纹纱结构的关系模型,提高花式线设计水平,为优化波纹纱生产工艺提供基础条件.
Lanthanide ions (Ln3+)-activated nanomaterials have been intensively explored as nanothermometers (NTMs) that can be used as optical thermal probes in various fields.[1] For instance, Ln3+ doped upcon
Luminescent adjustable quantum dot (QD)-solid nanocomposites have drawn great attention to telecommunication, microelectronics and optical devices, but fabricating and tailoring the luminescence of su
采用熔融法制备了Tb3+掺杂的Bi2O3-B2O3系统玻璃,研究Bi离子含量对玻璃发光性能的影响。研究结果表明：Tb3+掺杂的Bi2O3-B2O3玻璃由[BO3]、[BiO3]、[BO4]、及[BiO6]共同组成,且随着Bi2O3含量由25mol％增加到65mol％时,玻璃的变得结构疏松。当Bi2O3的含量大于等于45mol％时,出现Bi2+的571nm特征发射峰,说明部分Bi3+转化为Bi2+,