Axial Mixing in Monolith Reactors: Effect of Liquid Distributor

来源 :the 4th International Conference on Structured Catalysts and | 被引量 : 0次 | 上传用户:fengniao1625
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Axial mixing is an important factor which affects gas and liquid (G-L) mass transfer in monolith channels significantly and therefore monolith reactors design and operation.Monolith reactor bed consists of a great number of straight channels in parallel which are separated by very thin walls.Due to the special structure, G-L distribution is formed at the monolith entrance and keeps the distribution into channels through whole bed height without G-L redistribution.So the effect of liquid distributor on G-L distribution is critical to axial mixing in monolith bed.In the present work the axial-mixing behanvior of the liquid phase in cocurrent down flow under the two types of liquid distributors (nozzle and glass beads distributor), square channel monoliths of different sizes (100, and 400 cells per square inch or cpsi) has been studied by analyzing the residence time distribution (RTD) of the injected tracer pulse.
其他文献
Introduction The pollution of groundwater with nitrates resulting from the use of fertilizers, or other natural sources, is becoming a major environmental problem.Selective catalytic reduction of nitr
Methane can be converted to chemicals and fuels in two ways, either via synthesis gas or directly into C2-hydrocarbons or methanol.Today, almost all commercial processes for large scale natural gas co
The fulfilment of current and future soot (also called Particulate Matter or PM) emissions regulations in Diesel engines have led to the widespread use of Diesel Particulate Filters (DPFs).These syste
Biodiesel is a well-known biofuel that consists in a mixture of fatty acid methyl esters (FAMEs) of diesel quality that can be produced from vegetable oils, animal fats or cooking waste oil through th
The removal of contaminants from drinking water is a technological and societal priority for the coming decennia.Robust methods purifying water are needed, characterized by low cost and low energy pro
A novel porous alumina monolith was prepared by the anodization method.The catalytic performance of alumina for dimethyl ether (DME) hydrolysis was investigated.It was found that the anodic alumina ha
Catalytic cracking is a promising endothermic reaction with enough cooling ability, and could be applied in fuel-cooling thermal management system of advanced aircrafts, in which the fuel has to work
Introduction To reduce NOx emissions from lean exhaust gas (e.g.Diesel exhaust) selective catalytic reduction by NH3 (NH3-SCR) has become an established process for passenger cars as well as for heavy
Hydrogen is a clean energetic fuel and has been proposed as an ideal successor to fossil fuels.However, in consideration of its fast escaping capability and highly explosive character, how to store hy
Structured metallic supports are currently found in catalytic converters for vehicles and similar, with a trend being towards the use of these in packed bed reactors to replace the pelleted catalyst s