【摘 要】
：
The Lithium-rich layered cathode material Li2MnO3·2LiNi0.5Mn0.5O2 was fabricated by co-precipitation method.The structural and electrochemical properties of the material Li2MnO3·2LiNi0.5Mn0.5O2 were e
【机 构】
：
深圳清华大学研究院,广东,深圳,518057
论文部分内容阅读
The Lithium-rich layered cathode material Li2MnO3·2LiNi0.5Mn0.5O2 was fabricated by co-precipitation method.The structural and electrochemical properties of the material Li2MnO3·2LiNi0.5Mn0.5O2 were examined using X-ray diffraction,and galvanostatic cycling.The XRD pattern reveals that the material has a layered structure,and the electrochemical tests showed that the material Li2MnO3·2LiNi0.5Mn0.5O2 exhibited a high capacity and good cycle performance.
其他文献
Pervoskite La0.6Ca0.4CoO3 is a promising cathode catalyst for the application in metal-air batteries as it shows good stability during cycling[1].The activity of this catalyst mainly resides in its ab
在碱性环境下,一些非Pt材料特别是Pd基材料对醇类燃料小分子氧化具有电催化活性[1].为设计高性能新型Pd基电催化剂,有必要弄清醇类分子在Pd电极表面反应机理.然而,迄今对此分子水平上的机理研究不足[1-2].
锂离子电池硅基负极材料因其具有最高的质量比容量(4200 mAh/g)且价格低廉、放电平台低,成为目前最有希望取代碳材料的负极材料之一.但硅基负极材料在充放电的过程中会发生严重的体积变化并导致容量的快速衰减.
Room temperature ionic liquids (RTILs) have been widely used for electrodeposition of metals due to their wide electrochemical window,low vapor pressure and excellent thermal stability[1,2].Lithium is
近年来,随着电子器件市场的不断增长,智能电网、电动汽车等高新技术的不断发展,对化学电源特别是高性能二次电池的需求也迅速增长,研制开发新一代的可充式高能绿色环保电池成为紧迫任务.
TiO2 has emerged as an alternative material to the carbonaceous anode owing to its superior safety,chemical stability,non-toxicity and low price.However,TiO2,has intrinsically low Li-ion diffusivity (
论文制备了一种由碳包覆层和石墨烯共同构建的三维导电网络钛酸锂/石墨烯复合锂离子电池负极材料(C-LTO/G).均匀的碳包覆层和搭接在钛酸锂颗粒之间以及延伸至钛酸锂颗粒内部的石墨烯纳米片构成了三维导电网络.
18650型锂离子电池被认为是最成熟的锂离子电池,在移动通讯、笔记本电脑、电动工具、电动自行车甚至电动汽车上都得到了应用.该系列电池采用断路保护及泄压保护两种安全防护措施.
FeCl3-石墨插层化合物(FeCl3-GIC)是一种常见的石墨层间化合物[1].我们首次将此化合物用作锂离子电池负极材料.相比于传统的石墨材料,石墨插层化合物的插层客体能可逆储存更多的锂离子,因而其重量比容量远高于目前普遍应用的碳材料,达到500mAh/g.
过渡金属氧化物(如Fe2O3、NiO、Co3O4等)是一类具有高比容量(＞700 mAh g-1)的锂离子电池负极材料[1].其中,Fe2O3具有比容量高、成本低廉、环境友好和原材料丰富等优点而备受关注.然而,Fe2O3在嵌/脱锂的过程中发生较大的体积膨胀导致材料的循环性能较差;并且,电导率较低的缺点也使材料的倍率性能较差.