【摘 要】
：
The thermoelectric properties of non-stoichiometric Sn1-xMn1.1xTe alloys with heavy Mn content x =0.00, 0.05, 0.08, 0.10, 0.12 and 0.15 were investigated in this work.The samples were prepared through
【机 构】
：
深圳大学材料学院,深圳市特种功能材料重点实验室,深圳,518060
【出 处】
：
第十七届全国相图学术会议暨相图与材料设计国际研讨会
论文部分内容阅读
The thermoelectric properties of non-stoichiometric Sn1-xMn1.1xTe alloys with heavy Mn content x =0.00, 0.05, 0.08, 0.10, 0.12 and 0.15 were investigated in this work.The samples were prepared through vaccum melting followed by quenching and spark plasma sintering approach The X-ray powder diffraction patterns showed that samples doping with higher Mn comprise a major phase SnTe with NaCl-type structure and a secondary phase MnTe with NiAs-type structure.Owing to relatively high solubility of Mn in SnTe, effective enhancement on thermopower and significant suppression on thermal phonons can be achieved.Electrical and thermal properties can be simultaneous optimized in SnTe system resulting in a maximum ZT value of 1.21 for Sn0.9Mn0.11Te at 873K.
其他文献
通过VASP计算了Cr-Nb和Zr-Cr体系中的Laves端基形成能.通过SQS耦合VASP计算出上述体系中溶体相形成焓,并运用到热力学优化中去.对于存在争议的Cr-Nb体系中高温C14相稳定性问题,本文通过声子计算得到随温度变化的自由能,从而分析其相稳定性.通过合金法测定了Zr-Cr相图部分溶解度范围.通过上述数据,优化出Cr-Nb和Zr-Cr相图,并拓展得到Zr-Nb-Cr三元热力学优化参数.
The liquidus projection of the B-Fe-Mo system in the Fe-rich region has been proposed based on the microstructural characterization of arc-melted alloys through powder X-ray diffraction measurements,
为了设计出性能优异的Nd-Mg-Ni储氢合金,本工作在实验测定Nd-Mg-Ni体系300和400℃等温截面的基础上,建立并优化了该体系的热力学相图.XRD的实验结果表明,在富Mg-Ni侧存在一系列金属间化合物:Nd4Mg80Ni8和Nd16Mg96Ni12、NdMg5Ni、NdMg2Ni、Nd2MgNi2、NdMgNi4和NdMg2Ni9,其中Nd4Mg80Ni8和Nd16Mg96Ni12为新的金
平衡相图的特征成分点,如共晶、固溶极限等,对于材料成分选择乃至材料设计具有重要意义.本报告引入一个描述近程序的新结构手段,即团簇加连接原子模型,建立了对应于非晶和共晶成分点的液体结构模型,从而解决了非晶和共晶成分规律的难题.本模型把任何结构分解成两个部分,第一近邻配位多面体的团簇部分和位于团簇之外的连接原子部分,由此可以表述为团簇式:[团簇](连接原子)x.首先介绍最佳非晶形成能力的理想非晶的成分
Cu1.99A0.01Se (A =Cu, Zn, Ni, Fe, In, Sin) alloys with high thermoelectric performance were prepared through a conventional melting, ball milling and quenching route, followed by a spark plasma sinter
多元合金的物理性能计算是十分复杂的多尺度问题,建立物理性能的数据库是一个很大的挑战.采用计算相图方法描述热力学函数已经十分成熟,对于固溶体、化合物都有很成熟的模型,也可以处理带有磁性转变的相.模仿计算相图描述热力学函数的方法处理材料的物理性能,是一个建立物理性能数据库的新途径,具有显著的潜在应用价值。本文介绍了本课题组近期采用计算相图方法计算单相固溶体的物理性能的一些尝试性的工作,主要包括采用亚规
基于CALPHAD方法首先评估优化了LiF-GdF3和KF-GdF3二元熔盐相图.采用置换熔体模型描述液相的吉布斯自由能,LiGdF4、K3FGdF6、K2GdF5和KGd2F7中间相处理成准化学计量比化合物.借助经验的离子参数函数预测了实验数据缺乏的二元液相混合焓,据此辅助模型参数的优化.考虑实验数据误差,最终的优化计算结果与实验数据吻合较好,由此获得了能够可靠描述LiF-GdF3和KF-GdF
The intermetallic compounds of Nb-Si based refractory alloys have been investigated extensively for potential candidates in the fields of aircraft engines and gas turbines.However,the poor oxidation r
The Nb-V-Zr system was critically assessed by means of the CALPHAD technique.The solution phase (liquid, bcc, hcp) were modeled with the Redlich-Kister equation.The compounds V2Zr and ZrNbV,which have
Two series of (GeTe)0.85(Pb1-xSmxTe)0.15 (x =0, 0.08, 0.16, 0.2, 0.24 and 0.28) and Ge0.75Pb0.2Sm0.03Te1-ySey (y =0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6) were prepared by melting, quenching spark plasma sint