Effects of isothermal process parameters on the microstructure of Mg-8%Al-1% Si alloy by semisolid i

来源 :2012 Postdoctoral Symposium of China on Materials Science & | 被引量 : 0次 | 上传用户:ibyxpr
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  A semisolid microstructure of Mg-8%Al-l%Si alloy was fabricated by isothermal heat treatment process.The effects of isothermal process parameters such as holding temperature and holding time on the microstructure of Mg-8%Al-l%Si alloy were investigated.The results indicated that a non-dendritic microstructure could be obtained by isothermal heat treatment in alloy.With the increasing holding temperature from 560 to 575 ℃ or holding time from 5 to 30min, the liquid volume fraction increased, the average size of α-Mg grains grew larger and globular tendency became more obvious.In addition, the Mg2Si phase transformed from Chinese script shape to granule shape, the morphology modification mechanisium of Mg2Si phase in Mg-8%Al-1%Si alloy during the semisolid isothermal heat treatment was studied.
其他文献
With a view to successfully forming multi-sheet cylinder sandwich structure of Inconel718 superalloy, high temperature plasticity of the laser butt welding plate for Inconel718 superalloy with ultra-f
This study presents a novel process combining hot filament chemical vapor deposition (HFCVD) method and polishing technique to fabricate micro/nano-crystalline multilayered ultra-smooth diamond (USCD)
Four kinds of ZrC coatings with nearly the same thickness have been successfully prepared on graphite substrate by chemical vapor deposition (CVD) through controlling the ratio of inlet reacting gases
Outstanding anchor cable dynamometric system is urgently needed in anchor engineering of pre-stressed anchor cable so as to control tension during the process of anchor cable construction and monitor
曙一区稠油古潜山属底水块状油藏,储层裂缝发育,开发中存在含水上升速度快、区块年产油量下降速度快等问题.通过室内实验配方不断改进及施工工艺的优化、创新和完善,形成了颗粒凝胶型、水玻璃黏土胶及高强度树脂复合段塞相结合的系列堵水方式.根据各自特点确定选井条件,结合油井的具体情况采取相应配套堵水方式,提高了措施的针对性和成功率,有效地抑制了底水的锥进速度,改善了开发效果.2008~2009年期间,在研究区
针对西部凹陷西斜坡兴隆台油层含油分布范围广、厚度变化大、动用程度不均衡的现状,通过加强三维地震、储层反演等地球物理技术在该区兴隆台薄层稠油评价开发工作中的研究与应用,有效地指导了该区兴隆台薄油层的评价与开发工作,对其他类似地区薄层稠油的评价与开发工作具有借鉴作用.
To classify the quality of the resistance spot welding process, the relationship between the welder electrode displacement curve characteristics and the weld shear force has been explored where 11 sta
As a widely used general polymer material, PVC shows the great potential value for insulating or damping the sound and vibration due to their unique combination of structure, inherent damping, light-w
In-situ nanostructured FeAl2O4 composite coatings were prepared by plasma spraying Al/Fe2O3 composite powders using different spraying powers.The effects of plasma spraying powers on microstructure an
QCr0.8 was electron-beam welded to TC4 and the effect of the intermetallic layer (IMC-layer) on the mechanical properties of the joint was investigated.IMC-layers are joint weaknesses at the Cu fusion