Influence of the Angular Shape on the Behaviour of Aggregates based on the Discrete-Element Method

来源 :2017年世界交通运输大会 | 被引量 : 0次 | 上传用户：ran871229

【摘要】

：

　　Focused on the angular shape influence on the behavior of unbounded aggregates,several designed virtual uniaxial penetration tests were conducted in this pa

【作者】

：

Ding Xunhao Ma Tao Zhang Weiguang

【机构】

：

东南大学交通学院

【出处】

：

2017年世界交通运输大会

【发表日期】

：

2017年6期

【关键词】

：

unbounded aggregate uniaxial penetration test PFC2D angular shape frictional wor

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Focused on the angular shape influence on the behavior of unbounded aggregates,several designed virtual uniaxial penetration tests were conducted in this paper based on the commercial software named as Particle Flow Code in two dimensions(PFC2D).

其他文献

材料组成对沥青砂浆抗冻融性能的影响

　　为探究细观尺度下沥青混合料抵抗低温开裂的决定性因素，以沥青砂浆作为研究对象，采用弯曲流变仪来评价其低温性能；由于季冻区沥青路面冻融现象频发，本文引入了沥青砂浆冻融循

会议

路面工程冻融循环弯曲梁流变仪沥青砂浆

Preparation and Properties of a Novel Interfacial Adhesion Serving for Acidic Aggregate and Asphalt

　　Novel intercalated polymers(OMMT/asphalt anti-stripping agent,short for MAS)as anti-stripping agents were prepared in our lab serving for acidic aggregate a

会议

adhesion mechanisminterfacesasphalt anti-stripping agentthermo-stabilitybitu

3D打印技术在路面工程中的应用

　　3D 打印技术是一种新型制造工艺。本文首先简要介绍了目前主流的3D 打印技术以及对应的优缺点。其次，根据其技术特点简要分析了3D 打印技术在路面工程中可能具备的优势，以

会议

3D打印特殊路面结构功能性路面功能梯度材料

Study on g-C3N4TiO2 Composite Photocatalysts and Its Application to Asphalt for NO Removal

　　The g-C3N4/TiO2 composite photocatalysts were prepared by directly calcining the mixtures of melamine and TiO2,and the samples were characterized by X-ray d

会议

g-C3N4/TiO2PhotocatalysisEmulsified asphaltNO removal efficiency

Structure and Mechanical Properties of Light Colour Asphalt Based on DMA Test Method

　　Structure and performance characteristics study of light colored asphalt was few,although light color asphalt had been widely used in China.A representative

会议

Light color asphaltPetroleum asphaltStructureMechanical propertiesDynamic me

ECA罩面沥青路面就地热再生方案设计及工程应用

　　为了分析铺设2.5cmECA-10 罩面的SMA-13 上面层采用就地热再生技术进行养护维修的可行性，采用室内试验和工程实践相结合的方法，基于6.5cm 翻松深度，设计了复拌再生和加铺再

会议

道路工程ECA罩面就地热再生复拌再生加铺再生薄层罩面

Grey Target Evaluation and Mechanism of Cold Recycled Asphalt Mixture with Comprehensive Performance

　　Aiming to improve the pavement performance of emulsified asphalt cold recycled mixture in hot and rainy areas,the effect of emulsified asphalt content,cemen

会议

Emulsified asphalt cold recycled mixturematerial optimizationcrack resistance

掺加乳化沥青的水泥稳定碎石强度特性及疲劳性能

　　为了揭示掺加乳化沥青对水泥稳定碎石强度特性及疲劳性能的影响规律，减少半刚性基层反射裂缝的发生。基于无侧限抗压强度试验、劈裂试验、弯曲试验、抗压回弹模量试验、四

会议

道路工程乳化沥青水泥稳定碎石混合料强度特性疲劳性能

新型水性环氧树脂改性乳化沥青制备及其性能研究

　　针对目前市售的水性环氧树脂改性乳化沥青稳定性差和破乳速度慢的问题，采用丙烯酸类单体接枝环氧树脂制备出一种新型的水性环氧树脂，其具有优异的稳定性和与乳化沥青适配性

会议

水性环氧树脂丙烯酸类单体乳化沥青防水粘结层

Evaluation of Fracture Resistance of Asphalt Mixtures Using the Single-Edge Notched Beams

　　To determine and compare the fracture properties of different asphalt mixtures,single-edge notched beam(SENB)tests using three type asphalt mixtures were ap

会议

asphalt mixturesingle-edge notched beamnotched depthfracture toughnessfractu

Influence of the Angular Shape on the Behaviour of Aggregates based on the Discrete-Element Method

与本文相关的学术论文