Internal AC Preheating Method with Temperature Feedback and Lithium Deposition Prevention for Lithiu

来源 :第七届中国储能与动力电池及其关键材料学术研讨与技术交流会 | 被引量 : 0次 | 上传用户：lcy38

【摘要】

：

Internal alternating current (AC) preheating is considered as an effective preheating method to use or charge lithium batteries at low temperatures.

【作者】

：

张剑波

【机构】

：

清华大学汽车工程系

【出处】

：

第七届中国储能与动力电池及其关键材料学术研讨与技术交流会

【发表日期】

：

2015年5期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

Internal alternating current (AC) preheating is considered as an effective preheating method to use or charge lithium batteries at low temperatures.

其他文献

Annealed NaV3O8 nanowires with good cycling stability as a novel cathode for Na-ion battery

Rechargeable Na-ion battery has attracted lots of attention in recent years due to its huge availability of sodium,low price and the similarity of both Li and Na insertion chemistries1,2.In this work,

会议

Improvement in High-voltage and flame-retardant Performance of Lithium-ion Batteries Using FEC and D

In this work,we made an attempt to use FEC as an electrolyte additive to improve the high voltage stability of LiCoO2/Li battery.The use of dimethyl methylphosphonate(DMMP) as a flame-retardant additi

会议

Highly efficient Cu2O incorporated TiO2 nanotube photocatalyst for methyl orange degradation

It has been reported that TNT has enormous potential as photo-catalysts because of their peculiar properties which originate from their low dimensionality.

会议

(NH4)2V3O8纳米片的合成及其储锂性能的研究

目前锂离子电池已经广泛用于移动电子设备,人造卫星和航空航天等领域,也是混合电动汽车和纯电动汽车的重要选择。传统的商业化锂离子电池正极材料LiMnO2,LiCoO2和LiFePO4的理论比容量都低于170 mAh g-1,这使得电池的能量密度很难有大的提升。

会议

Hydrothermal Synthesis of MnO2-loaded Porous Carbons for Supercapacitors

The porous carbons have been prepared by chemical activation using commercial activated carbons as precursors and KOH as the chemical agent, and the MnO2 and MnO2-loaded porous carbons have been synth

会议

Porous carbonsHydrothermal synthesisMnO2Supercapacitors

Efficient Synthesis of Mesoporous Fe-N/C Materials with High Catalytic Performance for Oxygen Reduct

本实验通过模板法直接水热合成了有序介孔Fe-N/C材料,具有简单、经济和可持续的特点.试验中采用三聚氨胶硫酸盐控制碳源与软模板的有机自组装过程,引入硫酸铁为碳源,一步水热合成铁修饰的有序介孔氮掺杂碳材料.

会议

Microstructures and Energy Storage Properties of Sr0.5Ba0.5Nb2O6 Ceramics with BaO-B2O3-SiO2 Glass A

Sr0.5Ba0.5Nb2O6(SBN)ceramics with the BaO-B2O3-SiO2(BBS)glasses have been successfully produced for high energy-storage density capacitor applications.

会议

Energy storageSr0.5Ba0.5Nb2O6BaO-B2O3-SiO2glassesDielectric properties

Nb-ZrNi氢分离合金的组织和渗氢性能

研究了NbxZr(100-x)/2Ni(100-x)/2(x=0...50)合金的相构成、显微组织、渗氢性能及氢脆现象，并与贵金属Pd的渗氢性能进行比较.

会议

Nb-ZrNi合金显微组织氢渗透性抗氢脆

Enhanced Energy Storage Properties of La and Zr ModifiedBi0.5(Na0.82K0.18)0.5TiO3 Based Ceramics

The [Bi0.5(Na0.82K0.18)0.5)1-xLaxTi1-yZryO3(BNKLZT)energy storage ceramics were prepared by conventional solid-state reaction method.

会议

BNKLZTLead freeEnergy storageCeramics

可自支撑柔性硅/石墨烯复合薄膜负极的制备及其储锂性能

本文通过酸蚀铝硅合金粉制备硅纳米颗粒，并与石墨烯复合制备可自支撑柔性硅/石墨烯复合薄膜负极。利用XRD、SEM、TEM、XPS等多种表征于段对制备过程产物及复合薄膜的形貌与结构进行分析。

会议

自支撑柔性硅/石墨烯复合薄膜锂离子电池负极

Internal AC Preheating Method with Temperature Feedback and Lithium Deposition Prevention for Lithiu

与本文相关的学术论文