形状记忆聚合物智能模具在复合材料结构制备中的应用研究

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：jianting520

【摘要】

：

为制备复杂截面的复合材料结构，需选用特定的模具，结合特定的复合材料成型工艺(热压罐成型工艺、树脂传递模塑成型工艺、纤维缠绕成型工艺，等)固化得到。传统的模具主要包括：多片金属模具和水溶性模具，然而，这两种模具都存在一些无法克服的缺点，比如：金属模具生产成本高，生产周期长，安装和脱模过程繁琐；水溶性模具为一次性模具，每次都需要重新塑模，重新打磨模具表面，花费时间长。为克服这些缺点，具有刚度可变特性的

【作者】

：

杜海洋赵伟刘立武刘彦菊冷劲松

【机构】

：

航天科学与力学系,哈尔滨工业大学,哈尔滨,150001,中国复合材料与结构研究所,哈尔滨工业大学

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年7期

【关键词】

：

形状记忆聚合物智能可变形模具复杂截面复合材料结构

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

兼具低介电损耗和低渗流阈值的高介电常数碳纳米管/酚酞基聚芳醚砜/氰酸酯复合材料的研究

如何通过构筑复合材料的空间结构,在获得高介电常数的基础上兼具低介电损耗和低渗流阈值是目前high-k聚合物复合材料研究中的重要课题.本文以多壁碳纳米管(MWCNT)为导体,以酚酞基聚芳醚砜(cPES)/氰酸酯(CE) (w/w=10/90)混合体系为树脂基体,采用两步法制备了MWCNT/CE/10cPES复合材料,系统研究了其介电性能.研究发现,与MWCNT/CE复合材料相比,MWCNT/CE/1

会议

碳纳米管酚酞基聚芳醚砜结构氰酸酯介电性能

增强聚合物热导率的途径研究

导热聚合物在微电子封装和电气绝缘等领域获得广泛应用。在聚合物内形成稳定而有效的导热粒子通路，减少声子界面散射和热阻，强化声子传递是改善聚合物热导率的关键。本文分别从导热填料粒子、聚合物基体、界面结构性质、加工工艺等角度探讨了提高和改善聚合物导热性能的方法和途径。

会议

导热聚合物导热粒子表面改性电场辅助加工

THE PREPARATION AND CHARACTERIZATION OFGRAPHENE OXIDE CORE-SHELL HYBRID/SILICONERUBBER DIELECTRIC EL

In this work, GO core-shell structured hybrids were prepared by electrostatic self-assembly to prevent GO from self-agglomerating.To simplify and optimize the preparation of GO core-shell structured h

会议

Dielectric elastomerGraphene oxide core-shell hybridSilicone rubberDielectric

Using synchrotron radiation SAXS study the size of particle influence structure in nanoparticle/poly

In the paper, the different size of nano-particles prepared by in-situ polymerization method of polyimide composite film.The films were discussed by adopting Small Angle X-ray Scattering (SAXS) to res

会议

Research on the poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene)-based all-organic d

With the rapid development of electronic industry and technology, there are increasingly stringent requirements on dielectric materials with higher permittivity, lower loss and enhanced breakdown fiel

会议

dielectric propertiespolymer matrixpoly(n-butylmethacyrlate)loss tangentbrea

Controlled passivation and characterization of finealuminum flakes for dielectric composite applicat

In this paper, solution passivated aluminum flakes used for composite dielectric have been prepared with air and tiny water respectively as the oxidants in thermal solution, the passivation films were

会议

Aluminum flakepassivationcompositeleakage currentdielectric loss

Preparation of ultra-low dielectric constant silica/polyimidenanofiber membranes by electrospinning

Ultra-low dielectric constant silica/ polyimide (SiO2/PI) composite nanofiber membranes are prepared by the combined sol-gel and electrospinning techniques.The emulsion composed of partially hydrolize

会议

Ultra-low dielectric constantelectrospinningcomposite fiberscore-shell struct

Strong Induced Polarity between Poly(vinylidene fluoride-co-chlorotrifluoroethylene) and α-SiCand it

Interface polarization and interface zone have been widely utilized to account for the abnormallyimproved dielectric properties of composites although their formation is rather vague and theirinfluenc

会议

Dielectric properties and energy storage in polymer nanocomposites filled with core-shell structured

Dielectric materials with high dielectric constant, high breakdown strength and low dielectric loss have important applications in electric energy storage devices such as capacitors.Dielectric polymer

会议

The ways to enhance thermal conductivity ofpolymers

High thermal conductivity polymers find wider uses in microelectronic packaging and electrical insulation.The key points to improve thermal conductivity of polymer lie in: 1) forming stable and effect

会议

Thermal conductive polymerThermal conductive particlesSurface modificationEle

形状记忆聚合物智能模具在复合材料结构制备中的应用研究

与本文相关的学术论文