【摘 要】
：
Herein,we reported the nonlinear optical response of triiodide (CH3NH3PbI3) and mixed halide (CH3NH3PbI3-xClx) perovskite thin films.The results demonstrated that they have large nonlinear refractive
【机 构】
：
Institute of Crystal Materials, Shandong University, Jinan, 250100, China
论文部分内容阅读
Herein,we reported the nonlinear optical response of triiodide (CH3NH3PbI3) and mixed halide (CH3NH3PbI3-xClx) perovskite thin films.The results demonstrated that they have large nonlinear refractive index (NRI),three orders of magnitude larger than that of silicon.Particularly,the NRI of CH3NH3PbI3-xClx is more than two times larger in comparison to that of CH3NH3PbI3.Likewise,both of them have been proven to possess saturable absorption effects with small nonlinear absorption coefficients which indicate that they can maintain excellent absorption under high-intensity irradiation and are favorable to modulators towards large-energy pulsed laser.Considering the saturable absorption effect,we demonstrated a pulsed laser with the perovskite as a pulse modulator.These results above indicate the potential for perovskites to be employed in nonlinear optoelectronic devices.
其他文献
衡量一种光伏技术是否能够实现产业化,最基本的标准有三个:效率、成本和稳定性.毋庸置疑,钙钛矿太阳电池经过近几年的发展,已经出色的完成了对于效率与成本的考验.当追求高效廉价的狂热褪去后,稳定性的研究则越来越受到人们的重视1,2.基于FTO/PEDOT:PSS/Perovskite/PCBM/BCP/Ag 的倒置结构钙钛矿太阳电池不仅可以在简单的制备工艺下实现高效率,而且还可以有效的减少滞回效应,这为
近年来钙钛矿太阳能电池引起了巨大的关注,其光电转化效率从2009年的3.5％快速增长至2016年的22.1％.[1-5]本文主要介绍基于溶液一步法制备高效平板异质结结构的钙钛矿电池及其稳定性的研究.采用溶液一步法制备性能较好的钙钛矿吸收层(CH3NH3PbI3-xClx),并旋涂空穴传输层(HTM)得到光电转换效率为10％的钙钛矿平板太阳能电池.通过调节HTM中锂盐和TBP的含量,使其光电转换效率
To minimize the carrier recombination in the perovskites Solar Cells (PSCs) is essential to improve device performance.In this study,low-pressure vapor assisted solution process (LP-VASP) was employed
All-inorganic and lead-free cesium tin halides (CsSnX3,X=Cl,Br,I) are highly desirable for substituting the organolead halid perovskite solar cells (PSCs).However,the poor stability of CsSnX3 perovski
The HTM layer is considered to be necessary to highly efficient perovskite solar cells,which can well restrain photogenerated carrier recombination and facilitate the hole transportation and separatio
During the growth of CH3NH3PbI3-xClx (MAPbI3-xClx) perovskite films by the two-step inter-diffusion method,the presence of a trace amount of oxygen gas is critical to their physical properties and pho
经过六年的努力,钙钛矿太阳能电池的光电转换效率从3.8％提高到20％多,并且由于其制作成本相对较低,工艺易操作等优点引起了科学界广泛的关注.在钙钛矿太阳能电池光阳极材料研究中,人们除了研究制备不同形貌的TiO2 如:纳米管、纳米棒等来提高电池的性能外,还有对TiO2 基质进行掺杂处理.掺杂元素一般有金属掺杂和非金属掺杂两类,非金属元素掺杂的出发点是基于TiO2 基材中存在大量的氧缺陷浓度,会降低电
Since Miyasaka1 first reported perovskite absorber used for photovoltaic applications,the power conversion efficiency of perovskite solar cells (PSCs) has rocked to certified 22.1％ (certified) in just
Hole-conductor-free printable perovskite solar cells employ a triple mesoscopic layer structure of TiO2/ZrO2/Carbon and no hole-conductor or Au contact is required.A new mixed-anion perovskite of CH3N
Solvent engineering strategy was developed and utilized to optimize the hole-conductor-free fully printable perovskite solar cells (PSCs) based on pristine perovskite MAPbI3 as light harvester via one