论文部分内容阅读
The dazzling phenomena such as point saturation,line crosstalk present successively when laser irradiates on the CCD camera.
Analysis of Lattice Spots Dazzling to CCD Irradiated by CW Laser
【摘 要】
：
The dazzling phenomena such as point saturation,line crosstalk present successively when laser irradiates on the CCD camera.
【机 构】
：
Luoyang Electronic Equipment Test Center of China, Luoyang, Henan, 471003, China
【出 处】
：
LIMIS 2016——The 4th International Symposium on Laser Interac
【发表日期】
：
2016年8期
其他文献
Nomex蜂窝夹层板以其优异的力学性能被广泛应用于航空航天以及建筑领域,其中剪切强度是衡量其力学性能的重要指标。实践表明,Nomex蜂窝夹层板受温度的影响较大,尤其是在激光这类高升温率热源的作用下,力学特性下降明显。本工作根据GB/T1456-2005标准,设计实验研究了不同蜂窝取向的蜂窝夹层板试样在25、50、100、150和200℃下的剪切强度。研究发现,夹层板面板与蜂窝芯之间胶层的粘接性能退
耦合特性是材料激光辐照效应中的重要基础问题。金属材料在激光辐照下表面发生热氧化反应，造成金属对激光的耦合特性发生剧烈变化。我们通过实验研究了大气环境下纯铁薄片样品在1 070 nm连续激光辐照下耦合特性的变化规律，并通过控制激光辐照时间获得了不同反射率和氧化状态的纯铁氧化膜样品。利用椭偏光谱法研究了不同氧化状态纯铁氧化膜在1 070 nm处的折射率和消光系数，基于椭偏反演结果和氧化膜的微观形貌，提
高功率光纤激光器因其光束质量好、功率可拓展性强以及可获得的高功率泵浦源等优势，在工业加工、国防军事、生物医疗等领域得到广泛的应用，引起了越来越多的关注。特别是随着包层泵浦技术的发展，光纤激光器，尤其是1μm波段的掺镱光纤激光器，相比9××nm的半导体泵浦源，亮度提升了5～6个数量级。而近几年发展起来的同带泵浦技术再次将高功率光纤激光器的研究推向了高潮。
Variation tendency for pyrolysis activation energy of kevlar/epoxy composite materials on laser irra
Kevlar/epoxy composite material is an advanced material widely used in aerospace,aircraft,Marine ship and train industry due to the light weight,high strength,heat resistant and fire retardant.
会议
Laser active suppressing jamming is one of the most effective technologies to cope with optoelectric imaging systems.In the process of carrying out the experiment that supercontinuum laser was used to
Mechanics mechanism of ns laser ablation of liquid work substance is the new hot point of laser ablation propulsion.
Comparative investigation of fused silica surface damage performance under 1 Hz and 10 Hz 355nm lase
Damage properties of fused silica in nanosecond high power laser system have been investigated for many years,but most of the research work focused on damage performance in single shot mode,because of