Implementation and validation of depletion calculation based on CRAM method in SuperMC

来源 :第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13) | 被引量 : 0次 | 上传用户：gaolch012

【摘要】

：

【作者】

：

Peng Ge Lijuan Hao Guangyao Sun Binhang Zhang Jing Song

【机构】

：

Key Laboratory of Neutronics and Radiation Safety,Institute of Nuclear Energy Safety Technology,Chin

【出处】

：

第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13)

【发表日期】

：

2016年3期

【关键词】

：

SuperMC Depletion calculation CRAM Inner coupling Validation

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Depletion calculation is a key step in reactor design and analysis,which evaluates the nuclide components of materials in depletion zones during reactor operation.In Super Monte Carlo Simulation Program for Nuclear and Radiation Process(SuperMC),the depletion calculation function was developed with the depletion equation solved by Chebyshev Rational Approximation Method(CRAM),which has the advantages of high computing efficiency and high accuracy.

其他文献

Preparation of a hydrophobic catalyst on modified zeolite for the decontamination of tritiated air

The study of tritium treatment techniques is most commonly concerned with tritiated air decontamination.The usual method employed for atmospheric detritiation is the catalytic oxidation of tritium to

会议

hydrophobic catalysttritiated airdecontamination

Gas-and Plasma-Driven permeation of hydrogen isotopes through copper alloys

Chromium zirconium copper(CuCrZr)alloy has been selected as the heat sink material for the plasma-facing components in the International Thermonuclear Experimental Reactor(ITER).For the deuterium-trit

会议

plasma-driven permeationhydrogen isotopesCuCrZr alloy

Manufacturing and testing of CFC/CuCrZr mockups for HL-2M divertor

HL-2M is a new medium-sized copper-conductor tokamak device under construction at Southwestern Institute of Physics and can perform advanced divertor configurations,such as snowflake and tripod.An act

会议

CFC/CuCrZrBrazingDivertorHigh heat flux testing

Deformation behavior of Cu-rich Nano-phases in RPV model steel

Precipitation of Cu-rich nano-phases leads to the increase of ductile-brittle transition temperature,which may bring about a substantial threat to the safety of reactor pressure vessel(RPV).To underst

会议

RPV model steelCu-rich nano-phaseHRTEMdeformation behaviorcrystal structure

Preliminary fuel cycle analysis for a spent fuel burning reactor

The world needs more low-carbon energy for climate change mitigation.Nuclear power is an attractive alternative on carbon reduction and energy restructuring.There should be a long-term planning for nu

会议

Subcritical systemSpent fuel burningFuel cycle

Preliminary probabilistic safety assessment of tritium plant system for ITER

Fusion or thermonuclear power is a promising,literally endless source of energy.Development of fusion power is still in investigation and experimentation phases and the largest fusion experiment devic

会议

Probabilistic Safety AssessmentITERTritium PlantReliability

Gas dynamic trap system as volumetric fusion neutron source based on viable technologies

Gas Dynamic Trap(GDT)is very attractive as a kind of fusion neutron source for material test and driving transmutation reactor due to its linear and compact structure,easiness of construction and main

会议

Gas dynamic trapFusion neutron sourceFast ions confinement

Corrosion behavior of CLAM steel in flowing liquid PbLi at 480 ℃ with magnetic field

The liquid PbLi blanket is one of the most promising blanket concepts for fusion reactors and has been under extensive research in the world.One of key issues in the liquid PbLi blanket is corrosion o

会议

CLAMPbLicorrosionmagnetic field

Assessment of tritium cycle and public safety using TAS3.0

Deutrtium(D)and tritium(T)have long been touted as promising fuels for fusion power production because of their easily burning and available higher energy producing.Given that fusion reactor will cons

会议

Tritium cyclePublic safetyFusion reactorTAS3.0

CAD geometry based radiation transport simulation method in SuperMC

Describing geometry of advanced nuclear facility was difficult in Monte Carlo nuclear transport simulation.CAD based Monte Carlo modeling was proposed to facilitate it.Since CAD model usually contains

会议

SuperMCCADRay TracingFacet

Implementation and validation of depletion calculation based on CRAM method in SuperMC

与本文相关的学术论文