Superplasticity of cryorolled Al-Cu-Mg-x alloys

来源 :15th International Conference on Aluminium Alloys(ICAA15)(第十 | 被引量 : 0次 | 上传用户：wwwygtwww

【摘要】

：

【作者】

：

Rafts Ilyasov Stanislav Krymskiy Elena Avtokratova Anastasia Mikhaylovskaya Anton Kotov Oleg Sitdikov Michael Markushev

【机构】

：

Institute for Metals Superplasticity Problems RAS, Russia

【出处】

：

15th International Conference on Aluminium Alloys(ICAA15)(第十

【发表日期】

：

2016年3期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

Superplastie behavior of 2024 type aluminum alloy with different additions of transition metals processed by isothermal rolling at a temperature of liquid nitrogen was analyzed.Tensile tests were performed in a wide temperature-strain rate interval under constant velocity and strain rate conditions.

其他文献

Refinement of primary silicon crystals by novel P-doped γ-Al2O3 particles in solidification of hyper

P-doped γ2Al2O3 was found to be a potent substrate to nucleate primary silicon whilst good modification of the eutectic matrix is retained during solidification of hypereutectic Al-Si alloys.On using

会议

Computational simulation of localized corrosion in anodic films formed on AA 2099-T8 aluminium-lithi

Aluminium alloys are frequently used in the transportation industries because they are light in weight and easy to be processed and recycled, and they are commonly subject to anodizing treatment to en

会议

Effects of electric pulse and magnetic field for Mg2Si in 6181 aluminum alloys sheets formed by twin

In this paper, the morphology, distributions and sizes of precipitated phase (Mg2Si) in 6181 aluminum alloy strips manufactured by twin roll casting (TRC) process without and with electric pulse curre

会议

The effects of grain size and texture on the corrosion behaviour of a high-strength Al-Cu-Mg-Si allo

The effects of grain size and texture on the corrosion properties of an Al-Cu-Mg-Si alloy were investigated.Different grain size and various crystallographic orientations were produced through a novel

会议

High corrosion resistance associated with high-strength and good ductility in an Al-Mg-Si-Cu alloy m

Reducing localized corrosion such as inter-granular corrosion without sacrifice of strength and other good mechanical properties is an important issue for manufacturing the Al-Mg-Si-Cu alloys of high

会议

The influences of aging treatment and Zn addition on intergranular corrosion susceptibility of Al-Cu

The intergranular corrosion (IGC) behavior of 0.07Zn addicted Al-2.71Cu-1.56Li alloy and Zn-freed Al-2.78Cu-1.64Li alloy with two aging treatment systems were examined electrochemically.The influences

会议

Friction stir welding of Zr-modified AA5083 sheets in different conditions

The Al-5.4Mg-0.5Mn-0.1Zr (wt.％) alloy was subjected to a low-temperature solution treatment at 360℃ for 6 h.As a result, nanoscale Al6Mn particles with round shape evolved.The alloy was machined into

会议

Stress relaxation behavior of 7050 aluminum alloy with different heat treatments

The stress relaxation behavior of different heat-treated 7050 aluminum alloy at aging temperature has been investigated.It is observed that the phenomenon of stress relaxation is accompanied by precip

会议

Strain localization and microstructure evolution in 2060 alloy during bending

The strain localization and microstructure evolution of 2060 alloy were studied during bending.Specimens were loaded by different radii, and the microstructure evolution was studied by scanning electr

会议

The Effect of Bridge Geometry on Seam Weld Microstructures in Aluminum Porthole Die Extrusions

As aluminum becomes the material of choice for light weighting vehicles, the ability to manufacture complex extruded profiles with the correct mechanical properties becomes paramount.In porthole die e

会议

Superplasticity of cryorolled Al-Cu-Mg-x alloys

与本文相关的学术论文