【摘 要】
：
Homogenization is an important process for non-heat-treatable wrought aluminium alloys.It controls the solid solution level of alloying elements, the type, size and distribution of constituent particl
【机 构】
：
Department of Materials Science and Engineering, Norwegian University of Science and Technology, Nor
【出 处】
：
15th International Conference on Aluminium Alloys(ICAA15)(第十
论文部分内容阅读
Homogenization is an important process for non-heat-treatable wrought aluminium alloys.It controls the solid solution level of alloying elements, the type, size and distribution of constituent particles and, in particular, dispersoids, which have strong influences on the deformation properties, softening behavior, texture, formability and the mechanical properties of the final products.An overview is given on the microstructure evolution during heating, holding and cooling processes of homogenization treatment.A special emphasis is given to the precipitation behavior of dispersoids and its influence on recrystallizaiton.
其他文献
A CALPHAD coupled multi component multi-phase Kampmann-Wagner Numerical framework has been employed to treat the precipitation of various stable and metastable phases, i.e., β(Mg2Si), β"(Mg18Si10) and
A series of novel Al-Zn-Mg-Cu alloys containing 9.5～11.2 wt％ of Zn and 1.9～2.8 wt％ of Mg was developed, aiming to meet the application requirement of strength higher than that observed in currently us
In this study, a constructive equation with internal state variables is proposed to express high-temperature deformation behaviours of Al-Mn alloys under a wide range of strain rates.The formulation o
The precipitates in Al-Mg-Si and Al-Mg-Ge (0.43 at.％ Mg-0.2 at.％ Gebalanced in Al) alloys were compared using by high resolution transmission electron microscopy (HRTEM) to understand their precipitat
Positron annihilation lifetime spectroscopy (PALS) hardness measurements and DSC were applied to study the phenomenon of secondary natural ageing (SNA) in Al-Mg-Si alloys after short ageing treatments
The effect of alloying element on the age hardening behavior in an Al-Mg-Si alloy is studied, focusing on the role of vacancy.Al-0.6mass％ Mg-1.0mass％ Si alloys containing Ag or Sn element, which has l
In situ synchrotron X-ray powder diffraction is a powerful tool for studying phase transformations in engineering alloys, which, when combined with Rietveld-based data analysis methods, allows the pha
Three AA6082 based alloys with various Mn and Cr contents were cast and homogenized.Homogenization temperatures were selected between 550℃ and 580℃, i.e.above the solvus temperature of Mg2Si and below
Al-Mg-Si alloys are widely used as body panels in the automotive industry.This is due to the fact that they provide a good combination of strength, formability, and corrosion resistance.The material u
Recently developed Al-Cu-Li alloys, such as Al 2195, are ideal candidates for aerospace applications as they exhibit low weight and enhanced mechanical properties.The excellent strength of these alloy