铝电解用氮化硅结合碳化硅耐火砖的抗氧化性及抗腐蚀性

来源 :2004年有色金属冶金及材料第二届国际学术会议 | 被引量 : 0次 | 上传用户：junlintianxiap

【摘要】

：

本文研究氮化硅结合碳化硅耐火砖的抗腐蚀性和抗氧化性的测试方法,一种新的测试方法是在电解质中通入二氧化碳气体来模拟实际电解过程中电解槽内部的工作状态,这种新的测试方法测定了试样在电解质和二氧化碳共侵蚀作用下的性能,有利于了解电解槽内衬材料在铝工业电解中的腐蚀状况.且根据该方法制定了一个性能测试标准.同时测试了试样在高温下耐电解质、铝液的腐蚀性和在空气中的抗氧化性.这些测试方法简单易操作,且对于试样的

【作者】

：

曹晓舟高炳亮王兆文胡宪伟邱竹贤

【机构】

：

东北大学材料与冶金学院,辽宁沈阳 110004

【出处】

：

2004年有色金属冶金及材料第二届国际学术会议

【发表日期】

：

2004年5期

【关键词】

：

铝电解氮化硅结合碳化硅耐火砖铝电解槽内衬材料抗氧化性抗腐蚀性

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Study on synthesizing cathode materials (LiC0O2) by microwave method for lithium ion battery

A series of the electrode materials (LiCoO2) for Lithium ion batteries were synthesized by radiating the mixture of Lithium oxide and Cobalt oxide in microwave field. The synthesizing conditions inclu

会议

microwave synthesislithium ion batterycathodematerialsLiCoO2微波合成锂离子电池阴极材料

China's nonferrous metallurgy industry and its relevance to refractories

As well known, there exists a reciprocal relationshipbetween refractories industry and high temperatureindustries, in particular metallurgy industry.Refractories are consumed in many metallurgicalproc

会议

有色冶金行业耐火材料nonferrous metallurgyindustryits relevance

Study on amorphous Ni-S-Co alloy electrode in alkaline medium

Ni-S-Co alloy was prepared by electrodeposition in a modified Watts bath with addition of thiourea (TU) and CoCl2. The structure and morphology were determined by XRD and SEM respectively. The content

会议

Ni-S-Co alloyamorphouselectrodepositionHERcathode镍合金

A new way to preparing non-autoclaved and unburned brick using the titanic bearing BF-slag

The slag non-autoclaved and unburned brick(SNAUB) was prepared on laboratory scale using the high titania BF slag (HTBFS) as aggregate, styrene-acrylate emulsion as cementing materials and two admixtu

会议

high titania bearing BF slagstyrene-acrylate emulsionnon-autoclavedbrick高炉炉

Study on behaviors of the Co-Ni residue from purifacation of zinc hydrometallurgy

The purified Co-Ni residue, in the process of zinc hydrometallurgy, is treated with the hydrometallurgical process. The flow sheet, which is researched by us, indicates that cobalt, nickel and cadmium

会议

Co-Ni residueleaching processzinc浸出

Corrosion behavour of Cu-Ni-Ag-Al alloy in cryolite based molten salt

The behavior of Cu-Ni-Ag-Al alloy used as anode for aluminum electrolysis was directly visualized in a two-compartment see-through cell during electrolysis, and its performances were tested at 850℃ in

会议

metal anodesaluminum electrolysisozide filmporouscorrosion mechanism铝电解金属阳

Studies on softening of heat-affectedzone of pulsed-current GMA welded Al-Zn-Mg alloy

Studies on the softening behavior of the 7005 alloy by means of real welding experiments and heat-affected zone (HAZ) simulation have been conducted. Softening in the HAZ is found to occur above a pea

会议

aluminum alloysheat-affected zonesofteningweldingthermal simulation铝合金焊接

超强镁合金材料的研究与开发

本文简单介绍了我国的镁工业现状,概述了当前形式下轻量化技术的紧迫和镁合金所起的作用以及超强镁合金在航空航天等高端领域的应用,对超强镁合金制造工艺中非晶合金制备、快速凝固工艺以及变形加工方法,进行了理论分析和工艺的探讨,突出了非晶形成能力、晶化过程理论以及非晶粉末固结等关键工艺,为实际工作的开展形成必要的理论基础.

会议

超强镁合金非晶合金快速凝固晶化过程变形加工非晶粉末固结

铝硅铁为还原剂改良皮江法生产工艺的研究

研究了采用高岭土型煤矸石为原料,经碳热还原制取的铝硅铁合金为还原剂热还原炼镁的工艺条件。发现,与传统的硅铁还原剂相比,此还原剂具有还原温度低、还原速度快、过量系数小、制团压力低等优点。经初步估算采用此种还原剂,在相同的还原率下,把每日二个生产周期改成每日三个生产周期是完全可能的。若如此,在镁的产量可增加产品产量约1/3的同时,镁的成本约降低1680元/吨镁左右。

会议

炼镁工艺热还原铝硅铁合金还原剂煤矸石改良皮江法

Separation of aluminum melts from Inter-metallic compounds containing iron and silicon in electromgn

Theoretical analysis and experiments,the different conductivity between impurities containing iron and silicon,and molten aluminum had been used to separate them from molten aluminum by electromagneti

会议

electromagnetic fieldseparatemigratory efficiency铝熔体金属化合物

铝电解用氮化硅结合碳化硅耐火砖的抗氧化性及抗腐蚀性

与本文相关的学术论文