Experimental investigation of ZnFe80Ti20 diffusion couple and phase diagram calculation of the Zn-Fe

来源 :2014年全国博士后新材料技术与应用学术论坛 | 被引量 : 0次 | 上传用户:dddff628
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The phase diagram of Zn-Fe-Ti system at the Zn-Fe rich side was thermodynamically assessed.The Zn/Fe80Ti20 diffusion couple was prepared to investigate the phase equilibria at the Zn-Fe rich side.It suggested that the diffusion path from Fe80Ti20 alloy to Liquid Zn is Fe2Ti+Bcc(Fe) → Fe2Ti+Bcc(Fe)+T(Ti4.0Fe7.5Zn88.5)→ T+δ(FeZn10) →ξ(FeZn13) →ξ+Liquid at 450 ℃.Then a set of self-consistent thermodynamic description of the Zn-Fe-Ti system was obtained based on the experimental results and the data in literature.
其他文献
光谱仪用于是照明光度色度参量的基础测试设备,随着仪器科学、电子技术以及软件信息技术的不断发展,光谱仪也不断发生着变革.同时在照明领域,光源也从最初的白炽灯发展到气体
针对我厂的大容量励磁机离心式铸造风扇的整体铸造难度大,拟采用成熟可靠的焊接风扇来代替.为保证整体焊接风扇的机械性能满足发电机的设计和运行要求,本文对铸造风扇和焊接
随着发光二级管(LED)光源亮度的不断提升,LED已逐渐由装饰显示发展到照明领域的应用.LED反光杯能够将光源发出的光线反射到人们需求的方向,从而有效的提高了光能利用率.本文
  Directionally solidified DZ125L alloys of various Ti content were developed by low segregation technology.The microstructure, mechanical properties and cast
本研究采用通道夹角Φ=120°的等径弯曲通道变形技术(ECAP),成功实现了(TiB+TiC)/Ti6Al4V钛基复合材料4道次Bc路径的ECAP变形.采用光学显微镜、扫描显微镜和透射电子显微镜研
发展以第三代更高安全、更经济的核电机组为代表的新一代核电技术,是全球核电技术发展的趋势.为了能够适应新一代核电机组的安全和经济性需求,按核电汽轮机以反应堆参数容量
本文运用电火花沉积工艺,以45钢为基体,镍基合金Deloro60为电极制备了镍基合金电火花沉积层,并分析了其组织结构、表面形貌和显微硬度等。系统地研究了沉积层在干摩擦条件下随载
  Graphene (G) and graphene oxide (GO) were filled into epoxy resin (EP)respectively via chemical modification and physical ultrasound technology to improve t
  Four CrN coatings were deposited on 316L stainless steel by multi-arc ion plating.The tribological behaviors of the CrN coatings were investigated by ball-o
本文运用ANSYS有限元软件对1000MW汽轮发电机静叶片座装配体在安装工况下的约束模态进行了模态计算.采用三维实体单元建立了叶片座、导风圈、端盖筋板及垫块的有限元模型,并