A Multiple-Model MRAC Scheme for Multivariable Systems with Matching Uncertainties

来源 :第26届中国过程控制会议 | 被引量 : 0次 | 上传用户:a103582412
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  This paper develops a multivariable multiple-model adaptive control scheme for adaptive state feedback state tracking control of systems whose plant-model matching conditions are uncertain and parameters are unknown.To deal with the uncertainty of plant-model matching conditions needed for adaptive control,multiple reference model systems are employed to generate multiple parameter estimation and feedback control signals from which a most suitable control input is selected by a control switching mechanism designed using multiple estimation errors.Such a new multiple-model control design is based on an expanded control system parametrization which has the capacity to cover system structural uncertainties.Stability analysis and simulation results ensure and verify the desired adaptive control system stability and tracking performance.
其他文献
当前铜矿泡沫浮选的大量实时生产数据蕴含了过程工况的信息及变化规律,可以通过对生产过程的时序数据聚类分析并结合特征参数与工艺指标之间相关性,实现铜矿泡沫浮选工况的分类与识别。针对浮选过程数据具有时序性和实时性的特点,本文提出了基于滑动窗口的时序数据一致聚类方法。该方法首先利用基于Minkowski 距离的一致聚类算法对离线数据进行工况聚类,然后结合滑动窗口和一致聚类对铜浮选过程在线时序数据进行分类,
动态变规格冷轧生产过程具有多工况、变工况特征。大批量、成熟产品规格下的历史数据比较完备,而小批量、个性化产品规格下的历史数据比较匮乏,不能直接应用现有的基于数据的板形预测方法。本文应用模型移植的思想,引入PCA相似因子将变工况细分为渐变工况和突变工况,分别选用数据筛选和模型重构的移植策略,快速获得新工况下的板形预测模型。应用案例结果验证了方法的有效性。
为更好地分析水质信号在不同时频段上隐含的丰富信息,本文从时频分析中能量谱的视角研究了水质异常检测方法。在水质数据小波分析预处理的基础上,研究了小波包能量谱计算方法,利用小波包分解技术提取出正常水质信号与异常水质信号的频带能量特征,得到了水质时间序列不同时频段内的小波包能量谱,并以能量占比统计分布情况为准则,结合支持向量机分类方法进行正常和异常判断,利用氧化还原电位、pH、游离氯等多个水质指标小波能
超超临界机组过热蒸汽系统作为超超临界机组的重要组成部分是一个复杂的多输入多输出系统。针对该系统的模型辨识,本文采用基于数据驱动的闭环子空间辨识方法直接求得系统的阶跃响应系数,并结合传统的SISO(single input single output)辨识方法,利用最小二乘回归出系统的低阶传递函数模型。通过对某电厂超超临界机组过热蒸汽系统进行闭环辨识,辨识结果表明该策略很好地融合了子空间方法的简便性
Due to the characteristics of simple algorithm,low cost and small size sensor,optical flow has shown great potential in aircraft navigation,especially in GPS-denied environment.Optical flow could be u
针对3D 打印设备、3D 相关设备和运行数据的统一建模问题,提出并建立3D 网络系统合成模型,包含数据合成类型定义模型、单纯数据类型定义模型、组合数据类型定义模型、数据合成约束系统,实现3D 打印设备与3D 相关设备间的互操作、信息共享、协同工作;建立3DCNS 和3DNSC 的配套通讯体系,构建网络与设备的综合信息模型和对应通讯机制,实现网络与设备的自我表述。通过集成禁用品保护、在线防闭锁、区域
Industrial process plants are often characterized with problems of variable drifts and change of state.The time difference(TD)model was proposed by researchers to handle the drifting problems.However,
The stretching process plays a key role in the quality of the final fiber product.Due to the fiber stretching process with inborn nonlinearity,a global nonlinear model can be achieved by the way of th
This paper focuses on the batch to batch temperature control of a semi-batch chemical reactor with heating/cooling system.Without extensive modeling investigations,a 2D general predictive iterative le
This paper addresses the problem of input and state joint estimation for linear discrete-time stochastic systems without direct feedthrough from unknown input to output.The input estimate is obtained