A meso-mechanical constitutive model of particle reinforced titanium matrix composites at high tempe

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户:wx1980_2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The elastoplastic properties of TiC particle reinforced titanium matrix composites (TiC/TMCs) at high temperatures were analyzed by considering interfacial debonding.Based on Eshelbys equivalent inclusion theory and Mori-Tanakas concept of average stress in the matrix, the stress or strain of the matrix, the particles and the effective stiffness tensor of the composite were derived under prescribed traction boundary conditions at high temperatures.
其他文献
In order to figure out effects of alkaline-earth metal oxides on iron phosphate glass structure and properties, the glass system (100-x) (60P2O5-40Fe2O3)-xRO (RO=MgO, CaO, SrO, x=0,5,10,15,20,25 mol%)
Based on the previous research, the researchers select a group of iron phosphate glasses(38%Fe2O3-51%P2O5-6.4%CaO-4.5%ZrO2 wt%, Y1) with good alkali-resistant performance, and compare them with conven
Graphene-based thermal conductive composites have been extensively studied in recent years.However, a considerable number of works devoted to improve their thermal conductivities by increasing the loa
Polymeric composites with high dielectric permittivity and low dielectric loss are highly desired in the field of microelectronics to meet the requirements of miniaturization, high-energy storage dens
会议
We report a silver-graphene (Ag-G) composite material with improved electrical and mechanical properties.Ag nanoparticles are in situ synthesised on the graphene oxide (GO), so that fime interface is
In this work, paraffin-mullite fiber composites were prepared by melt infiltration process, particularly, to be embedded within the endotherms, ZrOCl2·8H2O, to provide for nonreversible heat absorbing
The objective of the present work is to determine the influence of the neutral salt spray corrosion on the wear resistance of HVOF sprayed NiCr-Cr3C2 coating with a bond coat (Ni-Zn-Al2O3 coating).Ni-
Self-passivated aluminum flakes (AFs) were incorporated into polyvinylidene fluoride (PVDF) matrix with oriented structure to form the 2-3-type AFs/PVDF composites.The thermal conductivity and dielect
By introducing other raw materials(SiO2, Al2O3, CaO) into the red mud ,all above materials were melted into Fe2O3-CaO-Al2O3-SiO2 system glasses.On the basis of 17.2Fe2O3-5.7CaO-18.2Al2O3-50SiO2-5.9Na2
For these recent years, piezoelectric energy harvesting has been a very popular research topic.Piezoelectric materials are used to harvest wasted mechanical energy from ambient environment and supply