Evaluation of microstructure and mechanical properties of Al-Mg-Si alloy ingots

来源 :15th International Conference on Aluminium Alloys(ICAA15)(第十 | 被引量 : 0次 | 上传用户：zbiao1222

【摘要】

：

【作者】

：

T.Yang Y.J.Guo L.Shen T.H.Gong Z.M.Shi H.S.Zhao

【机构】

：

School of Materials Science and Engineering, Inner Mongolia University of Technology,China

【出处】

：

15th International Conference on Aluminium Alloys(ICAA15)(第十

【发表日期】

：

2016年3期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

The microstructure and mechanical properties of continuous-casting Al-Mg-Si (5182) aluminium alloy ingots were examined along their transversal section.It was found that the microstructure and mechanical properties are not uniform in the transversal section of the ingots, especially in the ones with large-sections, which can not be effectively eliminated by a homogenous annealing.

其他文献

Experimental and numerical investigations on back-end effects of hollow aluminium profile during por

Back-end effect is one of most common effects during hollow profile extrusion, which has great influence on the product rate and production costs.The purpose of the present study is to investigate exp

会议

A quantitative study on the influence of through thickness texture variation on the anisotropic mech

The anisotropic mechanical behavior of aluminum extrusions is of interest to industry in terms of formability and crash behaviour.Depending on the homogenization and extrusion conditions a wide range

会议

Persistence of shear-type textures during annealing of ECAE-processed ultrafine grained materials: A

Understanding the annealing behavior of ultrafine-grained materials produced by severe plastic deformation is of interest for applications requiring a balanced strength and ductility.In this study, co

会议

Numerical simulation of residual stress in Al-Cu alloy component during quenching and reduction of q

In this study, residual stress development during quenching and cold compressive stress relief processes of complex component were studied by numerical simulation and experimental methods.An iterative

会议

Tube hydroforming characteristic of Al alloy with different heat treatment conditions

Tube hydroforming is metal forming technology that utilized internal pressure and axial compressive loads to generate designed product shapes with complex section from tubular materials.The tube hydro

会议

Effect of Cu and Mg/Si ratio on the intergranular corrosion resistance of 6000-series aluminum alloy

6000-series aluminum alloys with high Cu or excess Si addition were susceptible to intergranular corrosion (IGC).The corrosion behavior of four alloys with different Cu content and Mg/Si was investiga

会议

Selective laser melting of aluminium composite reinforced with carbon nanotubes

Previous work has shown that utilising carbon nanotubes (CNTs) as reinforcement for aluminium composite is of vital importance and great advantage.Selective laser melting (SLM), as a unique additive m

会议

Improving method research on acicular β-Fe phase of Al-Si-Cu casting aluminium alloy for engine cyli

The influence of cooling rate, the content of Fe, the content proportion of Mn and Fe on the β-Fe phase distribution of Al-Si-Cu alloy were studied.The results show that the β-Fe phase was reduced whe

会议

Nucleation behavior of Al and its alloys on single crystal substrates

The nucleation behavior of liquid Al and Al alloys on single crystal substrates with different termination planes was systematically investigated under controlled nucleation process.In the non-reactiv

会议

Effect of ultrasonic melt treatment on the extrusion characteristics in A5052 alloy

A5052 alloy has been one of widely used light alloy for application of automobile parts as structural material.Mg is principle element in A5052 to achieve mechanical properties arising from solid solu

会议

Evaluation of microstructure and mechanical properties of Al-Mg-Si alloy ingots

与本文相关的学术论文