【摘 要】
：
Recently,roll-to-roll (R2R) based fabrication technique,has been demonstrated as a promising method for mass production of organic solar cells (OSCs).However,most of these works were based on fulleren
【机 构】
：
Department of Materials Science and Engineering, College of Engineering, Key Laboratory of Polymer C
论文部分内容阅读
Recently,roll-to-roll (R2R) based fabrication technique,has been demonstrated as a promising method for mass production of organic solar cells (OSCs).However,most of these works were based on fullerene acceptors,and a few based on non-fullerene acceptors,which exhibited low power conversion efficiency (PCEs,generally ＜ 1％).In addition,there have been no comparative study on fullerene and non-fullerene-based roll-coated devices.
其他文献
自1991年,Gr(a)tzel课题组首次使用多孔TiO2薄膜制备高效率染料敏化太阳能电池以来,多孔TiO2薄膜被广泛用于染料敏化太阳能电池中.重现性强的丝网印刷法适合于大规模生产高性能介孔TiO2薄膜,但由于一次性印刷难以得到一定厚度的TiO2薄膜,使用的TiO2薄膜一般通过多次印刷得到.
Recently,graphene quantum dots (GQDs) has gained much attention to develop its applications in varies fields and many efforts have been made to exploit the optoeletronic properties which is important
Morphology optimization of the active layer is an essential way to improve the power conversion efficiency (PCE) of polymer solar cells (PSCs).The key factors for the active layer morphology are the l
提高有机太阳能电池效率的关键之一是设计并合成高性能的给受体光伏材料.目前的高效率有机太阳能电池主要是以p型聚合物/小分子半导体为给体和以富勒烯衍生物为受体,光电转化效率已经超过11％.然而,富勒烯受体具有可见光区吸收弱、吸收光谱及能级调控难、高温下形貌不稳定等缺点,非富勒烯受体己在近年来表现出堪比富勒烯受体的优异光伏性能,受到了广泛关注.
有机太阳能电池一直以来因其价廉、质量小、制备工艺简洁等优点受到了广泛研究.1,2,3本文介绍了在有机太阳能电池空穴传输层夹一层金属薄膜以提高太阳能电池效率的实验.我们热蒸发了不同厚度的夹层金属薄膜来观测在有机太阳能电池中激发出的表面等离子体效应的不同来确定能使电池效率提升最多的夹层方式.
Although the efficiency of organic solar cells(OSCs) has been steadily exceeding 10％ in the last few years[1],further efforts must be done to increase power conversion efficiency(PCE) in order to open
Thin film polymer:fullerene bulk heterojunction solar cells have attracted increasing interest over the last decade.Internal quantum efficiencies approaching 100％ have been achieved for current best s
富勒烯受体材料在聚合物太阳能电池中占据统治地位,但其存在难以提纯,可见光区吸收弱和能级难以调控等缺点.相比之下,非富勒烯受体具有独特的优势,如合成方便、易于提纯和加工、吸收强而宽和能级易于调控等.近年来,非富勒烯有机太阳能电池发展迅速,设计合成新型非富勒烯受体材料、研究其结构和性能之间的关系十分有必要.
In this study we employed l-chloronaphthalene (CN) and 1,8-diiodooctane (DIO) as additives exhibiting preferential solubility for processing the crystalline conjugated polymer poly[(5,6-difluoro-2,1,3
我们基于引达省单元设计合成了一种平面稠环电子受体( IC-C6IDT-IC).IC-C6IDT-IC在500-800nm范围内有较强的吸收,其摩尔消光系数可达2.4×105M-1Cm-1,电子迁移率高达1.1×10-3CmV-1S-1,与给体材料PDBT-T1间有很好的吸收互补和能级匹配,基于PDBT-T1:IC-C6IDT-IC的共混薄膜展现出非常平整的表面形貌和较强的"面朝上"π-π堆积,合适