【摘 要】
：
High-speed video cameras are indispensable tools for diagnostics on spray, atomization and drops. An image sensor with 300 kpixels operating at 40 Mfps at t
【机 构】
：
Research Institute for Science and Technology, Ritsumeikan University, Kusatsu, 525-8577 JAPAN
【出 处】
：
13th International Conference on Liquid Atomization and Spra
论文部分内容阅读
High-speed video cameras are indispensable tools for diagnostics on spray, atomization and drops. An image sensor with 300 kpixels operating at 40 Mfps at the highest frame rate is developed. Though the pixel count may not be sufficiently high for diagnostics of atomization of fluids to fine drops, the camera is useful in visualization of very fast sprays, especially, through a very small window, which requires a much higher frame rate, inversely proportionate to the size of the window. This paper presents the concept, the structure and the performance of the image sensor obtained through evaluation with the test camera. The image sensor has pixels each of which has in-situ storage of image signals. The in-situ signal storage is a linear CCD elongating in a direction slightly slanted to the pixel grid from the photodiode of each pixel. Simultaneous recording of image signals at all pixels makes it possible to capture consecutive frames at a time interval for a signal packet to be transferred from the photodiode to the nearby one of the storage element of each pixel.
其他文献
The problem of droplet impact into a thin film h*= 0.43 is studied using a new technique called Brightness- Based Laser Induced Fluorescence. Droplet speeds
Turbulent liquid/gas phase interface dynamics are at the core of many applications. For example, in atomizing flows, the properties of the resulting liquid
During the course of a severe accident in a nuclear power plant with core meltdown,the molten fuel(corium)can interact with water and under certain circumst
The direct numerical simulation of droplet breakup in homogeneous isotropic turbulence is investigated with the level set method. The Q-R analysis indicates
Numerical studies of liquid sprays and other particle laden flows for practical systems of interest traditionally involve an Eulerian-Lagrangian framework,i
A type of STL-injector (Self temperature limit) is proposed to reduce consumption and emissions of biodiesel. The STL-injector is expected to raise fuel tem
To meet future emission legislation for passenger cars with gasoline direct injection, combustion systems face the challenge to reduce engine out raw emissi
Knowing the droplets temperature is of great importance in spray-assisted combustion devices as it directly affects the droplet evaporation rate. This infor
Gas-assisted atomization is commonly seen in fuel injection systems, where the breakup and atomization of a liquid jet is assisted by a coflowing high-speed
The combustion characteristics and emissions in IC engines are influenced by the fuel injection rate. The study of fuel injection rate profile thus becomes