故障现象：开机即有温度报警灯亮，后继自检定标和检测皆不能进行。按说明书消除湿度报警故障步骤操作，不能奏效。用温度计已测得测量舱内温度为37℃左右，属正常范围。检修分析：为保障检测精度，血样要在一定的温度范围内进行检测。当温度偏离37℃一定范围时，机器将给出警 Symptoms: The temperature alarm light is on when the power is turned on. Subsequent self-calibration calibrations and tests cannot be performed. According to the instructions to eliminate the humidity alarm fault step operation, can not work. The measured temperature in the measurement cabin was about 37°C with a thermometer, which is a normal range. Maintenance analysis: In order to ensure the detection accuracy, blood samples should be tested within a certain temperature range. When the temperature deviates from a certain range of 37°C, the machine will give an alarm