切削深度和铣刀转数影响高速切削工艺稳定性,稳定卡描述了转数与切削深度之间的关系。在制造行业,特别是航空业,越来越多的综合构件要用实心材料制造。它们却不能满足精确度及表面质量方面越来越高的要求,数米存在偏差的现象并不罕见。部分原因是加工时间过长,所以通过缩短铣加工的基本时间可以降低这些部件的单件造价。 Depth of cut and number of mill revolutions affect high-speed cutting process stability. The stability card describes the relationship between revolutions and depth of cut. In the manufacturing industry, especially in the aviation industry, more and more integrated components are made of solid materials. They can not meet the higher and higher requirements in terms of accuracy and surface quality. It is not uncommon for meters to be biased. Part of the reason is that the processing time is too long, so the unitary cost of these parts can be reduced by shortening the basic time of milling.