论文部分内容阅读
Characterization of Band Sawing Dusts Generated in Cutting of Multi-crystalline Silicon Ingots
【机 构】
：
School of Photovoltaics/School of Materials Science and Engineering, Nanchang University, Nanchang 3
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2010年6期
其他文献
Amorphous nano-sized silicon nitride powders were sintered by liquid phase sin-tering.The influences of the additives of Y_2O_3 and Al_2O_3 prepared by two different ways,the poly-acrylamide gel method and the precipitation method,were investigated.The gr
The glass forming region of Bi_2O_3-B_2O_3-BaO ternary system was investigated.A serial of glass samples with high Bi2O3 content in Bi_2O_3-B_2O_3-BaO system were prepared by using conventional melting and quenching meld,and the refractive indexes and abs
A novel way for photo-immobilization with interferon-α(IFN-α)on the surface of polyurethane(PU)material,which makes PU condom more effective function in the future,was investigated.A kind of photoactive arylazide-4-azidobenzoic acid was modified to IFN-α
Biocompatibility of Implantable Electrodes Coated with PVA Films in the Brain of Rats:a Histological
The biocompatibility of silicone rubber(SR)based electrodes coating with poly (vinyl alcohol)(PVA)films after implanted in the brain of rats was investigated.Twenty-two Wistar rats were used and implanted with SR electrodes and PVA/PAA films coated electr
Silver powder was fabricated by spray pyrolysis,using 2%-20% AgNO_3 solution,336-500 mL/h flux of AgNO_3 solution,0.28-0.32 MPa flux of carrier gas and in the 620-820℃tem-perature range.The effects of furnace set temperature,concentration of AgNO_3 aqueou