论文部分内容阅读
During splitting rolling simulation,re-meshing is necessary to prevent the effect of severe mesh distortion when the conventional finite element method is used.However,extreme deformation cannot be solved by the finite element method in splitting rolling.The reproducing kernel particle method can solve this problem because the continuum body is discretized by a set of nodes,and a finite element mesh is unnecessary,and there is no explicit limitation of mesh when the metal is split.To ensure stability in the large deformation elastoplastic analysis,the Lagrange material shape function was introduced.The transformation method was utilized to impose the essential boundary conditions.The splitting rolling method was simulated and the simulation results were in accordance with the experimental ones in the literature.
During splitting rolling simulation, re-meshing is necessary to prevent the effect of severe mesh distortion when the conventional finite element method is used. However, extreme deformation can not be solved by the finite element method in splitting rolling. this problem because the continuum body is discretized by a set of nodes, and a finite element mesh is unnecessary, and there is no explicit limitation of the mesh when the metal is split. To ensure stability in the large deformation elastoplastic analysis, the Lagrange material shape function was introduced. the transformation method was utilized to impose the essential boundary conditions. the splitting rolling method was simulated and the simulation results were in accordance with the experimental ones in the literature.