论文部分内容阅读
图1是仪表内外圆磨床内圆磨具的风动小涡轮零件,我们在缩仿刻字机上完成了其风叶曲线的加工。方法如下: (1)划2.3±0.10mm尺寸线备对刀用。 (2)将工件套入心轴固定,然后装夹在分度头上(见图2)。 (3)将曲线模板(图3)装于机床模板托盘中。模块曲线的几例尺寸为工件的6倍。 (4)调?
Figure 1 is a small turbo-machined turbine components inside and outside the cylindrical grinder, we completed the plotter in the mold on the curve of the blade processing. The method is as follows: (1) Planning 2.3 ± 0.10mm size line with the knife. (2) The workpiece is set into the mandrel fixed, and then installed in the indexing head (see Figure 2). (3) Install the curve template (Figure 3) in the machine template tray. Several dimensions of the module curve are 6 times the size of the workpiece. (4) tune?