论文部分内容阅读
多工位级进模的主要工作部分也和一般冲裁模一样,可以分为凹模、凸模、卸料板三个部分。 以前四期谈的是凹模部分,这是因为首先要设计凹模。凹模的排列首先考虑到它的强度,其次是它的加工可能性与可靠性。 卸料板上的孔基本与凹模一致,但不完全相同。有时因为卸料板的问题需要重新布置凹模。
The main working part of multi-position progressive die is same with general blanking die, which can be divided into three parts of die, punch and stripper. The previous four talks about the female part, because the female part must first be designed. The arrangement of the die first takes into account its strength, followed by its processing possibilities and reliability. The hole on the discharge plate is basically the same with the die, but not exactly the same. Sometimes because of the problem of the discharge plate need to rearrange the die.