论文部分内容阅读
针对机载激光雷达信号Fernald前向反演方法要求准确得到标定值的问题,提出了一种新的定标方法:在机载激光雷达探测得到的各条大气回波信号廓线中,使用一条已知其大气气溶胶后向散射系数垂直分布的廓线,通过机载激光雷达方程来确定出其他各条回波信号廓线上的大气气溶胶后向散射系数标定值。模拟分析和实验验证了这种定标方法的可行性,用其标定值反演出的大气气溶胶后向散射系数垂直廓线是较为合理准确的;误差分析表明由该定标方法反演的大气气溶胶后向散射系数相对误差在20%以内。这种定标方法是可以运用于机载激光雷达信号Fernald前向反演的。
Aiming at the problem that the Fernald forward inversion method of airborne lidar signal needs accurate calibration value, a new calibration method is proposed. In the profile of each atmospheric echo signal detected by airborne lidar, The profile of atmospheric aerosol backscatter distribution is known and the calibration values of atmospheric aerosol backscatter coefficients on other profiles of the echo signals are determined by airborne lidar equations. Simulation analysis and experiment verify the feasibility of this calibration method. It is reasonable and accurate to use the calibration values to reverse the vertical profiles of atmospheric aerosol backscatter coefficients. The error analysis shows that the atmosphere retrieved by this calibration method Aerosol backscatter relative error of less than 20%. This calibration method can be applied to Fernald forward inversion of airborne lidar signals.