Solubility and Anisotropic Migration Behaviors of Helium in bcc Iron Under Strain

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:linuxlovermm5
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The different solution and migration behaviors of tetrahedral and octahedral interstitial helium in bcc iron have been investigated by using first principles calculations.We showed that the tetrahedral site has less charge transfer and less redistribution of the density of states but stronger bonding and a lower solution energy.This is due to the coupling between the symmetrical facts of the two interstitial atoms and the 3d orbitals of Fe atoms.The solution energies of both sites are not significantly influenced by applied normal strains of 2% and 4%.In contrast,the migration barriers have the reverse trends for different migration directions under strain,which can be explained by an anisotropic elastic energy change and charge transfer.The lower migration energy along certain directions under strain can facilitate the segregation of helium and the formation of helium bubbles.
其他文献
Microalloying is an effective approach to improve the mechanical properties of γ-TiA1 intermetallic compound.Knowledge about the site occupancy of the ternary alloying element in the crystal lattice of γ-TiAl is highly demanded in order to understand the
Classical powder metallurgy followed by either hot isostatic pressing (HIPing) or repressing-annealing process was used to produce Cu-graphene nanoplatelets (GNPs) nanocomposites in this work.A wet mixing method was used to disperse the graphene within th
In this work, the shear model of metal melt flowing on vibration surface is established, and coupling effects of vibration and shear on the distribution of shear stress in melt and melt solidification microstructure are analyzed. Calculation results show
The morphological evolution of Fe-rich phases in the AlSi9Cu3Mg0. 19(Fe) alloy has been investigated with various contents of Fe, Mn, and Cr. The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0. 6 wt% Fe combined with tra
Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. Different mixing methods were used in this study to control the distribution of AlN particles. The microstructure, thermal diffusivity and therma
A facile polyol-assisted pyro-synthesis method was used to synthesize Co3O4 nanoparticles embedded into carbon matrix without using any conventional carbon source.The surface analysis by scanning electron microscopy showed that the Co3O4 nanoparticles (~2
A polymethyltrimethoxysilane (PMTMS)/hydroxyapatite (HA) hybrid coating was successfully fabricated on a magnesium alloy by hydrothermal treatment and immersion method.The microstructure and composition of the coating were characterized by using X-ray dif
The growth behavior of Al3Ni intermetallic compounds (IMCs) during the directional solidification of Al-10 wt% Ni alloy was investigated by synchrotron radiography. Two main growth patterns of primary Al3Ni phase, I-like and V-like, appeared during solidi
Sand-cast Mg-9Gd-4Y-0.5Zr (wt%) alloy was solution-treated at 500-565 ℃ in the time range of 0.5-30 h in air or vacuum to investigate its microstructure evolution and mechanical properties.The results showed that solution treatment temperature had a signi