感应加热件进行连续淬火时,工件除转动外,与感应器还作相对移动,如图1所示。如果感应器上的功率恒定,而移动速度V(mm/s)变快或变慢,就会使工件加热温度降低或升高,因此v(mm/s)是一个重要的工艺参数,必须加以监测或监控. Induction heating for continuous quenching, the workpiece in addition to rotation, the sensor also for relative movement, as shown in Figure 1. If the power on the sensor is constant and the moving speed V (mm / s) becomes faster or slower, the heating temperature of the workpiece is reduced or increased, so v (mm / s) is an important process parameter and must be added Monitoring or monitoring.