强冲击载荷下 Ta-W 合金的塑变特征

来源 :稀有金属材料与工程 | 被引量 : 0次 | 上传用户:yjc0208
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
用轻气炮加载和冲击波测量技术测量了Ta和Ta-W合金在104/s~106/s应变率下的形变行为。根据平板冲击载荷条件,实验上建立了Ta-W合金的动态响应的本构关系,测量出合金的各动力学特性参数。本研究还就Ta和Ta-W合金在高应变率下的塑性形变方式、W的添加和应变率对动态形变过程及动力学性能的影响进行了观察分析和讨论。 The deformation behavior of Ta and Ta-W alloys at strain rates of 104 / s ~ 106 / s was measured by light gas gun loading and shock wave measurement. According to the slab impact loading conditions, the constitutive relation of the dynamic response of Ta-W alloy was experimentally established, and the kinetic parameters of the alloy were measured. In this study, the effects of plastic deformation mode, W addition and strain rate on the dynamic deformation process and dynamic properties of Ta and Ta-W alloys at high strain rates were also analyzed and discussed.
其他文献
本文概要综述了凝固组织数值模拟的基本方法,共晶合金和枝晶合金凝固组织的数值模拟进展,以及当前凝固组织数值模拟研究的发展方向。 In this paper, the basic methods of nu
研究了配碳量与Ni/Co比对WC-9(Ni-Co)硬质合金抗弯强度的影响。实验结果表明:WC-3Ni-6Co的配碳量是6.04wt%时,其抗弯强度与WC-9Co硬质合金相当;Ni的分布均匀性对抗弯强度的影响极其重要,粗粒Ni粉或(和)较多η相的存在都会使硬质
在讨论了现有液压系统动态建模方法基础上,提出了液压大系统动态建模的“灰箱”方法,叙述了该建模法原理、步骤及其应用。 Based on the discussion of the existing hydrauli
A 4-year-old boy had infantile bronchial asthma resistant to treatment. He was referred for a febrile respiratory distress which led to the diagnosis of perieso
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
<正>(接上期)第三段十九、转身扣手冲拳1、身体左转180°,右脚尖随体转里扣的同时,右掌以腕为轴,由内向外旋夺手,指尖朝下,左掌置于右腕内侧。(如图38)
期刊
1.建立财政支持“三农”资金总量稳定增长的机制。要切实贯彻执行财政支农支出的法定增长比例;要加大国家新增财力和长期建设国债用于“三农”的支出比重;要认真落实土地出让
陶瓷与金属直接钎接的关键问题是钎料的选择.采用活性钎料进行陶瓷与金属的直接钎接,并对接头进行了机械拉伸试验和金相分析,结果表明,钎料的选择是成功的。还介绍了钎料的冶炼工
观察比较了毒毛旋花子甙K(0.23mg/kg,iv)对戊巴比妥钠和维拉帕米所致家兔整体心衰模型的拮抗作用和毒毛旋花子甙K(0.31mg/kg,iv)对两模型组的毒性反应。比较毒毛旋花子甙K对两种心衰模型的拮抗作用和毒性反应
PURPOSE: Platelet-derived endothelial cell growth factor, identified to be an angiogenic factor, has been implicated in metastases of colorectal cancer. This st