车床上加工内锥面常用转动小刀架实现 ,但在批量生产时就很难保证加工精度的一致性 ,且生产效率低。为此 ,可用图 1所示的加工机具实现。图 1　内锥面加工机具结构图刀杆尾部为莫氏锥柄 ,插入车床尾座锥套内 (可装在刀台上 ) ,使其沿车床纵向移动 ,当导杆左滚轮与主轴前死挡铁 Lathe processing conical surface commonly used rotary knife holder to achieve, but in mass production it is difficult to ensure the consistency of processing accuracy, and low production efficiency. For this purpose, the machine tool shown in FIG. 1 can be used. Figure 1 cone processing machinery structure diagram The rear part of the Arbor Morse taper shank, inserted into the tailstock taper sleeve (which can be mounted on the cutter), so that it moves along the lathe in the longitudinal direction, when the left guide wheel and the spindle pre-death Stop iron