【摘 要】
：
The variation of the friction coefficient of the CuAlBi alloy at different connecting loading and friction speed were investigated by using MMU-5G sliding frict
【机 构】
：
E & A College,College of Mathematics and Physics
论文部分内容阅读
The variation of the friction coefficient of the CuAlBi alloy at different connecting loading and friction speed were investigated by using MMU-5G sliding friction-wear tester, besides, the wear mass loss of the CuAlBi alloy was measured, and the influence of loading and rotation speed on friction and wear properties of CuAlBi alloy was also discussed. The results show that the friction coefficient increase then decrease with increase of connecting loading as well as decreases with increase of friction speed, and the wear loss mass increases with increase of connecting loading and friction speed. As a result, the wear failure form of CuAlBi alloy is mainly ploughing.
其他文献
SiC continuous fiber-reinforced pure Ti(TA1) matrix composites were fabricated by a vacuum hot pressing(VHP) method and then heat-treated in vacuum under differ
The effect of an external magnetic field on the preparation of silver nanowires was studied. The silver nanowires were synthesized using solid electrolyte RbAg4
江西乐安河是鄱阳湖的重要支流，历史上被德兴、乐平两市百姓称为“母亲河”。然而由于德兴铜矿等矿企不断扩张，下游的乐平市深受污染之害，涉及约42万人。可追究责任之时。不曾想
为了锻炼身体,我们该多吃些什么好呢?中学生读者朋友肯定对这个问题相当好奇,但科学家给出的答案,估计和我们想的并不一样。饮食虽然不沾荤腥的少林武僧照样龙腾虎跃,最伟大
The phase transformation temperature of ordered β to disordered β in the Cu-Zn alloy was tested by DSC. The transformation activation energy was calculated an
By using electrochemical and weight loss methods, the effect of MoO42-on the corrosion behaviors of low alloy steel was investigated in the 55%LiBr+0.07 mol/L L
Carboxyl methyl cellulose (CMC) was mixed into mortar to improve the waterretention performance of mortar, the quality of floated coat of aerated concrete becam
The alteration of the strength, hardness and impact ductility of 5CrNiMo steel using three different additions of RE La element is studied in this paper. The me
The non-grinding long afterglow material SrAl2O4:Eu2+, Dy3+ was prepared by combustion method in home microwave oven directly, after dispersant, frother, combur
Conventional cathode material (LiCoO2) was modified by coating with a thin layer of La2O3/Li2O/TiO2 for improving its performance for lithium ion battery. The m