论文部分内容阅读
乔纳市位于匈牙利西部,上世纪末,这里已建成不少多层住宅。1960年以后,发展了新的住宅区。市政当局对新住宅提出了要求:在同一幢公寓中必须布置不同户型,同时应便于工业化施工。本方案采用横墙承重,有利于各层平面的前后伸缩,造成凹凸有趣的立面和面积大小不同的居室。共四层,底层作车库及储藏室供本公寓居民使用。第二、三层布置三室户(1起居室,2卧室),第四层布置二室户(1起居室,1卧室)。户型及层数可根据需要加以改变,但各层的浴室和厕所是同一标准设计,位置也不订变更。起居室、卧室及厨房的大小及隔墙位置在设计
The city of Jonah is located in the west of Hungary. At the end of the last century, many multi-storey houses have been built here. After 1960, new residential areas were developed. The municipal authorities put forward requirements for new houses: In the same apartment, different types of units must be arranged, and industrial construction should be facilitated. This program uses horizontal wall bearing, which is conducive to the expansion of the plane before and after the plane, resulting in interesting facades and different size of the room. A total of four floors, the ground floor as a garage and storage room for the residents of the apartment. The second and third floors are three rooms (1 living room, 2 bedrooms), and the fourth floor is equipped with two rooms (1 living room, 1 bedroom). The type and number of floors can be changed as needed, but bathrooms and toilets on all floors are of the same standard design, and locations are not subject to change. The size of the living room, bedroom and kitchen and the position of the partition are designed