本文仅仅讨论“晶体管型”和“扁平型”两种结构的微模组件的连接方法(图1)。而所讨论的相互连接仅限于软焊和硬焊。当然晶体管型——大家熟悉的晶体管壳,通常采用TO-5尺寸,有时采用TO-18和TO-47尺寸。此所表示的扁平外壳是最通用的1/4×1/4″尺寸,这儿所采用具有代表性。 晶体管型组件 首先谈谈晶体管型组件(图2)。具有几种 This article discusses only the “transistor type” and “flat type” two kinds of structure of the micro-module connection method (Figure 1). The interconnections discussed are limited to soldering and brazing. Of course transistor type - well-known transistor case, usually TO-5 size, sometimes with TO-18 and TO-47 size. The flat case represented by this is the most versatile 1/4 × 1/4 "size, representative of the use here. Transistor-based components First of all, talk about the transistor-type components (Figure 2)