论文部分内容阅读
对优控主轴转速系统的极限切削深度进行了试验考证。考证结果表明 :与未控主轴转速系统相比 ,优控主轴转速系统的极限切削深度明显提高 ,利用主轴转速寻优控制方法可以大幅度提高机床的切削效率。
The optimal control of the spindle speed system cutting depth of the textual research test. The research results show that: Compared with the non-controlled spindle speed system, the optimal control of the spindle speed system significantly increased the depth of cut, the use of spindle speed control method can significantly improve the machine’s cutting efficiency.