【摘 要】
：
In this paper, a perpendicular experiment was conducted by using 4 key process parameters, such as concentration of sodium tungstate, current density, PH value
【机 构】
：
Faculty of Materials Science and Engineering
论文部分内容阅读
In this paper, a perpendicular experiment was conducted by using 4 key process parameters, such as concentration of sodium tungstate, current density, PH value and operating temperature, which have obvious influence on the electrodeposition of Ni-W alloy nanocrystalline. By extreme difference analysis, the influence of multi-factors on the deposition rate and microhardness and surface quality of the nanocrystalline alloy coatings was studied in detail. By further contrastive experiment, the influence of single-factor on the electrodeposition of Ni-W alloy nanocrystalline was also discussed, which will provide basis for the preparation of Ni-W alloy nanocrystalline.
其他文献
To downsize and lighten automatic transmission components, the gears installed must be strengthened in terms of pitting endurance and/or wear resistance. The mo
为研究变压器合闸过电压的机理测试了220 kV牵引变电站主变空载合闸过程,波形及数据的综合分析显示系统过电压为高频振荡.ATP-EMTP模型的仿真结果表明,合闸相角、系统阻抗、
The heat treatment, including two steps, was proposed to obtain Fine Fully Lamellar (FFL) microstructure on TiAl containing minor Ni. The first step was in (α+
The valence electron structure (VES) in compound layer of steel plasma-nitrided at 560℃ with rare earth (RE)addition was calculated based on the empirical elec
A surface engineering approach for a novel pre-treatment of hard metal tool substrate for optimum adhesion of diamond coatings is presented. Firstly, an alkalin
亚波长光栅因光栅参量的不同而具有不同的衍射特性 ,通过对亚波长光栅参量的合理设计来实现消偏振窄带滤波是一种新的方法与途径。首先分析了基于共振异常的窄带滤波的物理机
Diffusion layers produced on carbon steel surface in vacuum titanizing process were investigated. Studies of layers thickness, their morphology, titanium, carbo
Coated tools are widely used in todays metal cutting industries and have significantly improved machining productivity through reducing operation costs and time
首先建立了混合有源滤波器无源网络的内部电磁干扰模型,根据三相电流和磁感应压降之间的矢量关系,推导出无源网络等效电抗和等效电阻的数学表达式,以及品质因数和谐振带宽受
Nanoindentation, scratch and wear tests based on an atomic force microscope (AFM) were carried out to study the reliability of diamond-like carbon (DLC) films,