【摘 要】
：
The high velocity oxy-fuel(HVOF)based thermal spray process has developed as a potential advantageous approach for fabricating various kinds of functional coati
【机 构】
：
Center for Corrosion and Protection
【基金项目】
：
This work was financially supported by the National 863 projects by the Department of Science and Technology of China;the Program of Beijing Significant Science and Technology Project
论文部分内容阅读
The high velocity oxy-fuel(HVOF)based thermal spray process has developed as a potential advantageous approach for fabricating various kinds of functional coatings.In this article,the coatings of Mo-based alloy were synthesized using the HVOF process.The microstructure and the mechanical properties of the HVOF-processed coatings were investigated using SEM,TEM,XRD,and hardness and wear tests.Annealing treatment was applied to the as-sprayed coatings to develop the microstructure and its effect on the microstructure and mechanical properties of the coatings was examined.It is found that the HVOF-processed Mo-based alloy coatings are comprised of an amorphous splat matrix embedded with nano-sized crystalline particles.Annealing at temperatures over 950 ℃ results into crystallization of the amorphous matrix.The mechanical properties of the as-sprayed coatings are enhanced with annealing temperature up to 750 ℃ and from 950 to 1050 ℃,keeps constant between 750 and 950 ℃,and reduce over 1050 ℃.The change of the mechanical property with the microstructure was illustrated in the study.
其他文献
The hot dipping process of pure aluminum on H13 steel substrates followed by plasma electrolytic oxidation(PEO)was studied to form alumina ceramic coatings for
The combined effects of (Y,Cu) on the microstructure and room-temperature mechanical properties of the NiAl intermetallic compound under uniaxial compression st
The fact that there are Mn2+ at the A sites in the ABO3 perovskite phase of manganites with the nominal composition La0.6-xNdxSr0.1MnO3 showed by detailed exper
To improve the segmentation quality and efficiency of color image,a novel approach which combines the advantages of the mean shift (MS) segmentation and improve
Numerical simulation combined with experimental test was carried out to analyze the pre-stretching process of the 7075 aluminum alloy sheet,from which the stres
The characteristics of inclusions in high-Al steel refined by electroslag remelting (ESR) were investigated by image analysis,scanning electron microscopy (SEM)
Cu-based and Cu-alloy-based diamond composites were made by high-pressure-high-temperature (HPHT) sintering with the aim of maximizing the thermal conductivity
By utilizing the time difference of arrival (TDOA) and frequency difference of arrival (FDOA) measurements of signals received at a number of receivers,a constr
The hot deformation behavior of TiNiFe shape memory alloy was studied by isothermal compression tests.It was performed on a Gleeble-3500 thermal simulation mach
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7