某公司采用出料篦缝为45mm、设计能力为900~1 100t/h的2PCF2025双转子破碎机,由于出料篦条磨损严重,提高产量后加剧磨损,无法保证正常生产,只能维持在600t/h进行破碎,而且更换篦子频繁,影响生产,制约了整条生产线的运行。对此我公司与用户深入交流,在现场观察磨损情况和磨损类型,提出了切实可行的设计方案,并取得了良好的使用效果。 A company with a discharge grate of 45mm, design capacity of 900 ~ 1 100t / h 2PCF2025 double rotor crusher, due to serious grate discharge material, increased production increased after the wear and tear, can not guarantee normal production, can only be maintained at 600t / h broken, and frequent replacement of the grate, affecting the production, restricting the entire production line operation. In this company I and users in-depth exchanges, observe the wear and tear in the field type, put forward a practical design, and achieved good results.