固体充填工作面液压支架合理工作阻力确定

来源 :煤炭技术 | 被引量 : 0次 | 上传用户:xpowers
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
通过深入研究某矿建下固体充填工作面矿压显现规律,进一步分析了充填采场覆岩移动规律,并通过建立力学简化模型来分析充填支架与围岩的关系,直接顶和基本顶由于受到固体充填体的支撑作用,直接顶的初次垮落步距增大,采场周期来压现象不明显,但仍有周期来压现象,且来压步距增大,从而合理确定充填液压支架的工作阻力。研究成果为充填支架选型提供依据,也促进了固体充填开采工艺的发展。 By studying the regularity of underground pressure in solid filling face under a certain mine, the law of overlying strata movement in filling stope is further analyzed, and the relationship between filling bracket and surrounding rock is analyzed through the establishment of mechanics simplified model. The effect of solid filling body, the direct caving step of the first caving step increases, but the phenomenon of periodic pressure in the stope is not obvious, but there is still periodic pressure to increase the pressure step, Work resistance. The research results provide the basis for selection of filling stents and also promote the development of solid filling mining technology.
其他文献
利用AMESim软件,建立了带式输送机制动系统的开环模型,得出正常制动和停电制动工况下制动时正压力和制动速度的变化曲线,并分别对停电制动时节流阀不同流量和蓄能器不同充气
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
据IHS统计,2013年全球新船订单量为3346艘1.0388亿总吨,自2008年金融危机后首次突破1亿总吨。同期,中国新船订单量为4410万总吨,同比增长210%,订单主要集中在散货船;韩国为3612万总吨,同比增长200%,日本为1407万总吨,同比增长66%。中日韩新船订单占全球份额分别为43%、14%和35%。