【摘 要】
：
Low cost hydride-dehydride (HDH) Ti-6Al-4V (Ti-64) alloy powder was employed to investigate the metallurgical quality and mechanical properties of laser formed
【机 构】
：
State Key Laboratory of Solidification Processing
论文部分内容阅读
Low cost hydride-dehydride (HDH) Ti-6Al-4V (Ti-64) alloy powder was employed to investigate the metallurgical quality and mechanical properties of laser formed samples. With appropriate control of the laser forming processing parameters and the loose density of HDH powder, two kinds of defect, i.e. porosity and ill-bonding, can be avoided. Rare earth Nd powder was added to HDH Ti-64 powder to purify laser formed alloy. The results show that with a few additive of Nd, the microstructure of laser formed alloy changes from Widmanst-tten morphology to a basket weave microstructure. Accordingly an appropriate addition of Nd is effective to improve both the strength and ductility of laser formed HDH Ti-64 alloy. The values of tensile test meet the wrought specification with the content of Nd ranging from 0.1%-0.2%(mass fraction).
其他文献
Electroplating zinc coating as transition layer of electroless nickel plating on AM60 magnesium alloys was investigated. The zinc film can be deposited in a pyr
Al-5.6Zn-3.0Mg-1.6Cu-1.1Li-0.24Cr alloys and Al-8.0Zn-2.4Mg-2.4Cu-1.1Li-0.18Zr alloys (mass fraction, %) were aged by different processes. The microstructure an
The oxidation behavior of TiAl-Cr(mole fraction of Cr-0-20%) was investigated at 1 173 K in air. The microstructure and composition of the oxide scale were stud
BiFeO3-PbTiO3 (BFO-PT) thin films were prepared on Pt/TiO2/SiO2/Si substrates by pulsed-laser deposition (PLD) technique under different oxygen pressures. The s
A new power divider, composed of a novel composite right/left-handed (CRLH) transmission line (TL) unit, is proposed. The properties of the power divider based
The binary mixture of Yb2O3-La2O3 was used as an additive to improve the traditional electroless plating for Pd-Ag co-deposition on the inside surface of a poro
Pseudo-spin-valve (PSV) sandwiches using amorphous CoNbZr alloy as soft magnetic layer were fabricated by magnetron sputtering. The giant magnetoresistance (GMR
A three-layer structure back-propagation network model based on the non-linear relationship between the purity of the perovskite-type SrTiO3 nano-crystal sample
Reversible variable length codes (RVLCs) have received much attention due to their excellent error resilient capabilities. In this paper, a novel construction a
The effects of Sr element on the forming properties of the Al-Mg-Si based alloy sheets were studied by tensile test,metallograph, DSC, XRD, SEM and TEM. The res