论文部分内容阅读
神华天津煤炭码头有限公司是2007年初正式投入运营的。原有清扫器为H型和P型合金橡胶清扫器,经过半年时间运行后,整个清扫器支架横梁出现晃动,合金橡胶刀片磨损严重,与胶带接触面参差不齐,清扫不干净,黏附在输送带上的物料经过回程托辊时碰落,很快会堆积大量物料,甚至接触回程输送带造成停机。同时,物料被带到回程段上,引起输送带的强烈磨损,在下托辊形成积垢,造成胶带跳
Shenhua Tianjin Coal Terminal Co., Ltd. was formally put into operation in early 2007. The original cleaner is H-type and P-type alloy rubber cleaner, after six months of operation, the entire scaffolding holder beam shaking, alloy rubber blade wear serious uneven contact with the tape, cleaning is not clean, adhere to the transport Belt on the material after falling back roller touch, will soon accumulate a large number of materials, or even contact the return conveyor caused by downtime. At the same time, the material is brought to the return section, causing strong belt conveyor wear, the formation of scale under the roller, resulting in tape jump