论文部分内容阅读
一、NC—6机芯维修模式(S模式)的进入或退出电视机在开机状态下,无论是在TV状态,还是AV状态,先按一次遥控器上的“静音”键,然后再次按下遥控器上的“静音”键不放,接着按下电视机本机键盘上的“菜单”键(MENU),则电视机屏幕右上角出现“S”字样,表明电视机进入了维修状态。屏幕显示如图1(a)所示。若再单独按下本机键盘上的“菜单”键,则显示如图1(b)所示的维修模式。之后就可进行以下的各种操作。
First, the NC-6 movement maintenance mode (S mode) to enter or exit TV in the boot state, whether in the TV state or AV state, press the remote control once the “mute” button, and then press The “Mute” button on the remote control, and then press the “MENU” button on the TV’s local keyboard, “S” appears in the upper right corner of the TV screen, indicating that the TV has entered the maintenance state. The screen shown in Figure 1 (a) below. If you press the “Menu” button on the local keyboard separately, the maintenance mode shown in Figure 1 (b) is displayed. After that you can do the following various operations.