4×4 multiple-input multiple-output coherent micro" />

4 × 4 multiple-input multiple-output coherent microwave photonic link with optical independent sideb

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:cwq2214
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A 4×4 multiple-input multiple-output coherent microwave photonic (MWP) link to transmit four wireless signals with an identical microwave center frequency over a single optical wavelength based on optical independent sideband (OISB) modulation and optical orthogonal modulation with an improved spectral efficiency is proposed and experimentally demonstrated. At the transmitter, the OISB modulation and optical orthogonal modulation are implemented to generate an OISB signal using a dual-parallel Mach–Zehnder modulator (DP-MZM) driven by four microwave orthogonal frequency-division multiplexing (OFDM) signals with an identical microwave center frequency. At the receiver, the OISB signal is coherently detected at a coherent receiver where a free-running local oscillator (LO) laser source is employed. Digital signal processing is then used to recover the four OFDM signals, to eliminate the phase noise from the transmitter laser source and the LO laser source, and to cancel the unstable wavelength difference between the wavelengths of the transmitter laser source and the LO laser source. Error-free transmission of three 16 quadrature amplitude modulation (16-QAM) 1 Gbps OFDM signals and one 16-QAM 1.5 Gbps OFDM signal at a microwave center frequency of 2.91 GHz over a 10 km single-mode fiber is experimentally demonstrated.
其他文献
测不准原理被用来导出激光束的最终谱宽。得到的表示式就是肖洛-汤斯公式。推导是简单的,并且很容易将它编入激光导论教程。这种推导也可以在现代物理教程中用来说明测不准原理的作用。
期刊
结构光三维测量广泛应用于测量物体外轮廓,但使用这种技术测量金属零部件时,会由于金属表面的局部强反射形成高光区域,这种高光致使相机饱和、信息丢失,造成条纹中心提取不准确,从而产生较大的测量误差。因此,寻找一种有效的手段来避免高光问题是非常必要的。基于结构光测量系统自身的特点,提出一种新的高光去除方法——频域滤波法。该方法将高光视作噪声,通过对比分析漫反射光条和高光光条频谱分布的不同,制作合适的滤波器
A novel fiber Bragg grating (FBG) sensing system based on code division multiple access (CDMA) technology is proposed. CDMA is used to separate each reflected sensor. Simulation of experimental results indicates the CDMA technology combines with optical f

声光调制器在激光技术、网络通信和雷达波谱分析仪等领域已得到广泛应用。作为声光器件的核心元件,各类声光材料得到广泛关注。首先,简要概述声光衍射的基本概念和声光材料的重要性能参数,包括衍射效率、品质因数及超声衰减;其次,回顾常见的声光晶体和玻璃材料的研究历程,及其在声光调制器领域的应用;最后,综述近年来新型声光材料的研究现状,指出晶体和玻璃分别作为商用化声光材料存在的优势与不足,为进一步提高声光器件的性能,拓展应用领域提供了参考和借鉴。

最近在工业界发现的高功率、高压开关技术正在和一项新的准分子激光放大系统一起向国防部推荐,这可把一个适中的激光装置的峰值功率提高到1兆兆瓦。
期刊
Mid-infrared pulsed lasers operating around the 3?μm wavelength regime are important for a wide range of applications including sensing, spectroscopy, imaging, etc. Despite the recent advances in technology, the lack of a nonlinear optical modulator opera
期刊
软X射线成像需用高分辨率波带板(Zone plate)。本文分析了齐明系统非齐明点球差特性。利用这种特性可以产生制作高分辨率X射线波带板所需的两束非球面波。文中还给出了合肥国家同步辐射实验室光束线所用的软X射线波带板的结构参数和制造这种波带板的光学系统。
Li -d
In this paper, we present the development and application of a full-aperture backscatter diagnostics system at the Texas Petawatt Laser (TPW) facility. The diagnostic system includes three independent diagnostic stations. With this system, we obtained TPW
报道了一种新的同可溶性好的,具有连苯结构的共轭有机聚合物:聚(2,5-二丁氧基)苯撑(简称PPP),采用四波混频方法测量了它在532 nm和1064 nm处的三阶非线性光学系数,由此推算了非线性折射率,并讨论了材料的优质因子,指出了材料最适用的光波段。