【摘 要】
：
Most of traditional traveling wave piezoelectric transducers are driven by two phase different excitation signals,lead-ing to a complex control system and seriously limiting their applications in industry.To overcome these issues,a novel traveling wave sa
【机 构】
：
State Key Laboratory of Mechanics and Control of Mechanical Structures,Nanjing University of Aeronau
论文部分内容阅读
Most of traditional traveling wave piezoelectric transducers are driven by two phase different excitation signals,lead-ing to a complex control system and seriously limiting their applications in industry.To overcome these issues,a novel traveling wave sandwich piezoelectric transducer with a single-phase drive is proposed in this study.Traveling waves are produced in two driving rings of the transducer while the longitudinal vibration is excited in its sandwich compos-ite beam,due to the coupling property of the combined structure.This results in the production of elliptical motions in the two driving rings to achieve the drive function.An analytical model is firstly developed using the transfer matrix method to analyze the dynamic behavior of the proposed transducer.Its vibration characteristics are measured and compared with computational results to validate the effectiveness of the proposed analytical model.Besides,the driv-ing concept of the transducer is investigated by computing the motion trajectory of surface points of the driving ring and the quality of traveling wave of the driving ring.Additionally,application example investigations on the driving effect of the proposed transducer are carried out by constructing and assembling a tracked mobile system.Experi-mental results indicated that 1)the assembled tracked mobile system moved in the driving frequency of 19410 Hz corresponding to its maximum mean velocity through frequency sensitivity experiments;2)motion characteristic and traction performance measurements of the system prototype presented its maximum mean velocity with 59 mm/s and its maximum stalling traction force with 1.65 N,at the excitation voltage of 500 VRMS.These experimental results demonstrate the feasibility of the proposed traveling wave sandwich piezoelectric transducer.
其他文献
市政道路工程施工中切实保障基础结构的稳定性至关重要,这也就需要重点围绕着地基进行优化处理,力求不断提升其整体可靠性,解决可能出现的不均匀沉降问题.如果在市政道路工程中遇到软土路基,更是需要采取相匹配的施工技术进行加固处理,下面即重点围绕着市政道路工程中软土路基施工项目,首先明确了软土路基的危害性及其处理要求,然后介绍了当前常用的一些软土路基施工技术,最后又探讨了如何优化软土路基施工处理效果.
截止到目前为止,我国的建筑装饰工程项目中,建筑装饰技术手段还存在着大量的缺点和漏洞,同时这些缺点和漏洞等一系列问题还没有得到妥善的解决.为了高效解决建筑工程的防火安全问题,该文以建筑装饰工程建设举例,对建筑防火设计进行全面研究分析,简述配电系统防火设计、电路防火设计、照明防火设计.整体增强电气消防设计工作品质,确保进出口的全面安全.
我国建筑行业随着城市化进程的不断加快得到了飞速的发展,而建筑工程施工现场管理的好坏不仅直接影响到项目工程的质量,而且对环境保护也有十分重要的作用.在建筑工程施工的过程中会产生各种污染,这对周围居民的生活造成了不良影响,因此对施工现场中环境保护存在的问题进行分析并提出了相应的解决措施.
Researchers have recently attempted to monitor pool oscillations using the three-dimensional laser vision method.However,the deficiency of simulation software will result in significant capital expenditure.Both simulations and experiments are performed in
A coupling dynamic model of a subway train and an embedded track is established to study the safety limits of track irregularities.The simulated vehicle system was a 74-degrees of freedom multi-rigid body model,and the rail was a Timoshenko beam.The slab
针对目前应用于有机朗肯循环(ORC)的容积型小容量膨胀机结构复杂、难以应用推广的现状,提出了一种新型球形滚珠膨胀机.其组合了滚动转子式膨胀机和往复活塞式膨胀机的部分特征及优点,结构简单、零件数少、制作方便、运动平衡性好.介绍了球形滚珠膨胀机的工作原理和运行过程以及部分主要零件的设计,并在此基础上设计了一种区别于常规进气结构的优化方案,取消了进气阀,减小了流动损失和阀门振动噪声.针对某一工况设计了膨胀机尺寸,并进行了润滑设计和泄漏分析以及容积效率估算.
Sheet-bulk metal forming(SBMF)is a promising process for manufacturing complex sheet components with func-tional elements.In this study,the entire forming process for a typical thin-walled component with external gearing is investigated,including sheet fo
A decrease in the weight of aerospace vehicles,large ships,weapons,and high-speed trains will increase the demand for wide-width magnesium alloy plates and their composite parts to replace steel and plastic.An investigation was conducted to study the vari
The current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time,or adding alloy elements into the steel to induce precipitation strengthening and improve the strength and plasticity of the steel.I
Joining metal to plastic can lighten weight of products to reduce energy consumption.However,it is difficult to achieve high-strength welding between metal and plastic.To address this problem,the methods of surface texture pretreatment and laser irradiati