论文部分内容阅读
1989年8月23日,我矿冷风峒工区斜井提矿作业发生一起跑车事故,死亡一人,停产三天。分析认为,这是一起多环节违章的责任事故。一、违章表现 (1)由600水平至620水平的2号肓斜井的自动捞车器,多年使用效果良好,但近来动作不正常。事故前8天坑口检查安全时,对捞车器动作不正常既没有采取处理措施,又没有向矿领导汇报,仅作出“要对矿车、连环钩加强检查,井底取挂钩工要等空车放到井底后才能出避车峒室作业”的决定。这实际上就是不要求使用斜井安全捞车装置。8月23日上午,副工区长开卷扬机提
On August 23, 1989, a car accident occurred in the inclined mine shaft mining operation in the mine’s cold wind mining area, killing one person and suspending production for three days. Analysis, this is a multi-link violations of the accident. First, the illegal performance (1) from 600 level to 620 level of No. 2 inclined shaft automatic fishing car for years with good results, but recently the action is not normal. 8 days before the accident pit inspection safety, the trolley did not take action to deal with irregularities, and did not report to the mine leaders, only to make “to the car, chain hook to strengthen the inspection, take the bottom hole to be empty Car to the bottom of the well to avoid the car 峒 room operation ”decision. This is actually not required to use inclined well safety car fishing device. On the morning of August 23, a deputy working area opened a winch