【摘 要】
：
The sintered W-15wt.%Cu alloys fabricated by mechanical alloying were re-sintered under pressure to increase the density and improve the properties of these all
【机 构】
：
Materials Science and Engineering School,Department of Materials Science and Engineering
论文部分内容阅读
The sintered W-15wt.%Cu alloys fabricated by mechanical alloying were re-sintered under pressure to increase the density and improve the properties of these alloys. The pressure was applied vertically along the axis of the sintered sample. Properties such as density, hardness, and bending strength were measured. The microstructures of the sintered bodies were observed. The results showed that the subsequent pressure sintering could increase the density of the sintered W-15wt.%Cu alloys. Their hardness, bending strength, and some other physical properties were also improved by this subsequent densification treatment.
其他文献
Laser bending of sheet metal is a flexible forming technique by using laser scanning. Based of temperature gradsmechanism, the temperature field of sheet metal
Fatigue crack propagation behavior of K40S cobalt-base superalloy under ambient atmosphere at 700 ℃ and 900 ℃ was investigated. The detailed fatigue crack pro
A high alkali reactive aggregate-zeolitization perlite was used to test the long-term effectiveness of LiOH in inhibiting alkali-silica reaction.In this paper,t
The compatibility between a fiber optical sensor and concrete structure in the optic fiber smart concrete is studied.The methods of improving the compatibility
A slurry dip-coating technique was developed for fabrication of ZrO2/Mo-Si/Ni functionally graded material (FGM)on the stainless steel substrate. The rheologica
The microstructure and creep behavior of a DS NiAl-Fe(Nb) multiphase intermetallic alloy have been investigated. This alloyexhibits dendritic structure, in whic
A nanostructured surface layer was synthesized on a Iow carbon steel by using surface mechanical attrition (SMA)technique. The refined microstructure of the sur
Mobile ad hoc networks are particularly vulnerable to denial of service (DOS) attacks launched through compromised nodes or intruders. In this paper, we present
A new edge detection method combining the scanning window central edge (SWCE) detector and an improved active contour model is proposed. The method first emploi
The effects of Ag on the microstructure and mechanical properties of 2519 aluminum alloy were investigated by means of tensile test, micro-hardness test, transm