本文是一篇用T_i59可编程序计算器通过编程对拉、压力传感器标定时的数据加以处理的文章,从而使标定数据的繁杂计算可以由机器来加以处理,大大缩短了计算时间。通过计算可得到传感器的特性表达式、非线性误差、滞后误差、重复性相对误差和精度。 This article is an article with T_i59 programmable calculator through the programming of the pull, pressure sensor calibration data to deal with the article, so that the calibration data can be complicated calculations can be processed by the machine, greatly reducing the calculation time. Through the calculation can be obtained sensor characteristic expression, nonlinear error, hysteresis error, repeatability relative error and accuracy.