PLASTIC DEFORMATION BEHAVIOR OF ELECTROFORMED COPPER LINER OF SHAPED CHARGE AT DIFFERENT

来源 :金属学报：英文版 | 被引量 : 0次 | 上传用户：mrchangmeng

【摘要】

：

The paper deals with different plastic deformation behavior of electroformed copperliner of shaped charge, deformed at high strain rate (about 1×107 s-1) a

【作者】

：

H.Y.Gao Q.Sun

【机构】

：

DepartmentofMaterialsPhysiceandChemistry,210Institute

【出处】

：

金属学报：英文版

【发表日期】

：

2003年1期

【关键词】

：

塑性成形疲劳电化成型模铜 electroformation electron backscattering Kikuchi pattern cellula

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

The paper deals with different plastic deformation behavior of electroformed copperliner of shaped charge, deformed at high strain rate (about 1×107 s-1) and normalstrain rate (4×10-4 s-1). The crystallographic orientation distribution of grains

其他文献

INVESTIGATION ON TWO-BODY WEAR OF AUSTENITIC MANGANESE STEEL THROUGH NUMERICAL QUADRATURE

The mathematic calculation on two-body wear of austenitic manganese steel has been performed by means of the elastic contact theory, stress interferometer and S

期刊

奥氏体锰钢数字积分两体磨损SEM计算模型mathematic calculationmanganese steeltwo-body wear

FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL

An approach is presented to characterize the stress response of workpiece in hard machining,accounted for the effect of the initial workpiece hardness, temperat

期刊

H13钢工具钢流动压力模型硬加工flow stress model hard machining AISI H13 work tool steel

INFLUENCE OF HEAT TREATMENT ON OXIDATION PROPERTIES OF C／C COMPOSITES FABRICATED BY HIGH PRESSURE IM

Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The

期刊

碳/碳复合材料离子注入制备SPIC热处理氧化性能SEM碳化物carbon/carbon composites high pressure im

A METHOD OF AS-CAST CRACK PREDICTION BASED UPON NUMERICAL SIMULATION OF SOLIDIFICATION

Based on the numerical simulation of solidification of castings, a thermal stress formula and a thermal crack initiation criterion are established, which sugges

期刊

AS-浇注法断裂预防数字仿真凝固层solidification crack initiation crack prediction numeric

A MONTE CARLO SIMULATION OF SECONDARY ELECTRON AND BACKSCATTERED ELECTRON IMAGES IN SCANNING ELECTRO

A new parallel Monte Carlo simulation method of secondary electron (SE) and backscattered electron images (BSE) of scanning electron microscopy (SEM) for a comp

期刊

蒙特卡罗仿真SEM二级电子反射电子图像处理几何结构金属材料Monte Carlo SEM secondary electrons backs

RESEARCH ON CHEMICAL COMPOSITION AND MICROSTRUCTURE OF NEWLY—DEVELOPED HIGH STRENGTH AND HIGH ELONGA

The different chemical composition of silicon and manganese as well as different re-tained austenite fraction ranged from 4% to 10% of the high strength and hig

期刊

高强度钢高塑性钢化学成分显微结构铜镍钼热轧high strength high plasticity carbon silicon ma

我国高校资金运营多目标非线性规划模型设计

本文采用系统研究方法，把高校资金运营的所有问题作为一个整体，将高校、银行和政府纳入研究体系．充分考虑各方的利益需求，设计出我国高校资金运营多目标非线性规划模型，同时把这个

期刊

高校资金运营非线性模型

对哈耶克生产过程理论的补充与修正

摘要：本文针对哈耶克的生产过程理论的不足和缺陷，分别对生产过程中的产品交易、生产者货物和劳动力在不同生产阶段的配置、生产过程结构变化的原因等三方面的补充和修正。这些补充和修正增强了哈耶克生产过程理论对现实问题解释力，为人们今后正确认识资源在生产过程中的配置及利率与经济结构的变化的关系提供了重要参考。　　关键词：生产过程；生产阶段；利率　　　　哈耶克的生产过程理论作为奥地利学

期刊

生产过程生产阶段利率

IGNITING SHS BY LASER AND ITS APPLICATION TO SELECTIVE LASER SINTERING OF METALLTC POWDER MATERIAL

How to directly fabricate metallic functional parts with selective laser sintering (SLS) process is a potential technique that scientists are researching. Exist

期刊

SHSSISCO2SLS

MICROSTRUCTURE AND ELECTROCHEMICAL CHARACTERISTICS OF Zr0.9Ti0.01（Ni1.1.Mn0.7V0.2）x METAL HYDRIDE EL

The crystal structure,the phase composition and the electrochemical characteristics of Zr0.9 Ti0.1(Ni1.1Mn0.7V0.2)x(x=0.90,0.95,1.00,1.05) alloys were investiga

期刊

金属氢化物电极显微结构电化学性能XRDSEMEDS储氢合金metal hydride electrode microstructure ele

PLASTIC DEFORMATION BEHAVIOR OF ELECTROFORMED COPPER LINER OF SHAPED CHARGE AT DIFFERENT

与本文相关的学术论文