设计专用机床及多轴钻头时,在已知孔距位置及传速比的情况下,来计算其传动系统的位置,是设计中的一个关节,为便于座标镗床上加工起见,因此各轴孔位置常用座标距标注。今将有关计算分述于后,供设计时之参考。 一、座标计算法 (1)座标计算: a)如图1所示,已知l;z1;z2;z3;m。)图5已 When designing a special machine tool and multi-axis drill bit, it is a joint in the design that the position of the transmission system is known given the position of the hole and the transmission speed ratio. For the sake of machining on the coordinate boring machine, each axis Hole position common coordinate distance label. This article will be divided after the calculation for the design of the reference. First, the coordinate calculation method (1) Coordinate calculation: a) As shown in Figure 1, known l; z1; z2; z3; m. Figure 5 has been